User's Manual

Click on to open “Color Editor”,
where users can customize colors.
Click the button again to close the
color editor.
Color Schemes
By clicking on , users can see the current color scheme in the
lower right corner. The drop-down list is used to choose
different color schemes. The default color scheme of point cloud
is drawing according to the intensity. Users can choose azimuth,
distance, laser_id, or timestamp as the color scheme as well.
Figure VII.11 Current Color Scheme Figure VII.12 Color Editor
lick on to open “Color Editor”,
y clicking on , users can see the current color scheme in t
lower right corner. The drop-down list is used to choose
Click to compensate the azimuth error caused by the delay of laser activation.
lick to compensate the azimuth error caused by the delay of laser activation.
-55-