User's Manual

Table Of Contents
5
1.2
LiDAR Structure
128 pairs of laser emitters and receivers are attached to a motor that rotates horizontally.
Figure 1.2 Partial Cross-Sectional Diagram
Figure 1.4 Rotation Direction (Top View)
The LiDAR’s coordinate system is shown above. The Z-axis is the axis of rotation.
The origin is shown as a red dot in Figure 1.6 on the next page. After geometric transforms, all the measurements are relative to the origin.
Each laser channel has an intrinsic horizontal angle offset. When Channel 42 passes the zero degree position (y-axis) illustrated in Figure 1.4, the azimuth
data in the corresponding UDP data block will be 0°.