User's Manual
Table Of Contents
- Contents
- Safety Notice
- 1 Introduction
- 2 Setup
- 3 Data Structure
- 4 Web Control
- 5 PandarView
- 6 Communication Protocol
- 7 Sensor Maintenance
- 8 Troubleshooting
- Appendix I Channel Distribution
- Appendix II Absolute Time and Laser Firing Time
- Appendix III PTP Protocol
- Appendix IV Phoenix Contact
- Appendix V Nonlinear Reflectivity Mapping
- Appendix VI Certification Info
- Appendix VII Support and Contact
42
■ Return Mode
■ UDP Port
Users can select from Block 1 Return (i.e. Last Return), Block 2 Return
(i.e. Strongest Return), and Dual Return.
Enter the UDP port number, and click “Set” to apply it.
■ Channel Selection
Click on to show/hide point cloud data from the selected laser channels.
Check/Uncheck the boxes on the left to show/hide each channel.
Check the “Enable/Disable all” option at the bottom of the table to show/hide all channels.