User's Manual
Table Of Contents
- Contents
- Safety Notice
- 1 Introduction
- 2 Setup
- 3 Data Structure
- 4 Web Control
- 5 PandarView
- 6 Communication Protocol
- 7 Sensor Maintenance
- 8 Troubleshooting
- Appendix I Channel Distribution
- Appendix II Absolute Time and Laser Firing Time
- Appendix III PTP Protocol
- Appendix IV Phoenix Contact
- Appendix V Nonlinear Reflectivity Mapping
- Appendix VI Certification Info
- Appendix VII Support and Contact
54
7 Sensor Maintenance
■ Storage
Store the device in a dry, well ventilated environment. The ambient temperature should be between -40°C and +85°C, and the humidity below 85%.
Please check the specifications page in this user manual for product IP rating, and avoid any ingress beyond that rating.
■ Transport
Package the device in shock-proof materials to avoid damage during transport.
■ Cleaning
Stains on the device’s enclosure, such as dirt, fingerprints, and oil, can negative affect the point cloud data quality.
Please perform the follow steps to remove the stains.
1) Thoroughly wash your hands or wear a pair of powder-free PVC gloves.
2) Analyze the type of stains on the enclosure
Dust
Blow dry air onto the enclosure
Or, use a piece of lint-free wipe to lightly brush across the dusty area
Persistent stains
Move on to the next step
NOTE
· To avoid damaging the optical coating, DO NOT apply pressure when wiping the enclosure
· Only clean the stained area of the enclosure
· Check before using a lint-free wipe. If the wipe is stained, use another.
(Continued on the next page)