Installation Instructions

CURB INSTALLATION

(continued)

BACK AND SUPPORT WALL ASSEMBLY

2. The curb should be as level as possible and permanently anchored to the patio surface using

stainless steel masonry anchors & bolts (not included). If you choose not to permanently anchor your

suite, be sure you have moved it to its final location. Also be aware that the suites featuring a bar

are prone to tipping over unless the curb is anchored to the floor surface. The Outdoor Living Suite

is very heavy and difficult to move once assembly is complete and all equipment has been installed.

(8 foot Outdoor Living Suite curb shown)

3. Use 2 each 3/8-16 x 5/8” long hex bolts to align and attach the back wall to the curb. Be careful the

back wall does not tip over if the curb was not anchored down. Tighten all bolts.