Installation Manual

FINAL INSTALLATION

INSTALLING TWO OR MORE UNITS TOGETHER - TOTAL OPENING WIDTHINSTALLING TWO OR MORE UNITS TOGETHER - TOTAL OPENING WIDTH

The best practice for planning and installing built-in units together is to combine the actual

widths of each unit, and add another 1/8" [3 mm] to get the total opening width. When placed

next to each other, the side profile trims are used to hold the units together (discussed on the

next page).

MODEL

SIZE

ACTUAL WIDTH

36" 35-3/8” [899 mm]

30" 29-1/2” [749 mm]

24" 23-5/8” [599 mm]

18" 17-11/16” [449 mm]

EXAMPLE (30" + 24" units) - The 30" model has an actual width of 29-1/2" [749 mm], and a 24"

model has an actual width of 23-5/8" [599 mm]. Added together:

29-1/2" + 23-5/8" + 1/8" = 53-1/4" [1351 mm]

EXAMPLE (30" + 24" + 36" units) - The 30" model has an actual width of 29-1/2" [749 mm], a 24"

model has an actual width of 23-5/8" [599 mm], and a 36" model has an actual width of 35-3/8"

[899 mm].

29-1/2" + 23-5/8" + 35-3/8" + 1/8" = 88-5/8" [2250 mm]