Trash Bin Conversion Instructions

TRASH BIN CONVERSION

(ADD-ON TO SLIDE-OUT

LP TANK TRAY)

Installation Instructions

IMPORTANT - READ ALL INSTRUCTIONS BEFORE YOU BEGIN

Some parts inside your grill cart have sharp edges. Care must be taken when handling the various

components to avoid personal injury. Wear gloves when handling.

TOOLS REQUIRED:

Work gloves

Drill with Phillips screwdriver tip.

STEP 1

Pull out the LP tank tray and remove the tank, if not done so already. Align the new sheetmetal

parts with the holes as shown below. Use the drill to install the 12 screws as shown.

PAGE 1
TRASH BIN CONVERSION (ADD-ON TO SLIDE-OUT LP TANK TRAY) Installation Instructions IMPORTANT - READ ALL INSTRUCTIONS BEFORE YOU BEGIN Some parts inside your grill cart have sharp edges. Care must be taken when handling the various components to avoid personal injury. Wear gloves when handling. TOOLS REQUIRED: Work gloves Drill with Phillips screwdriver tip. STEP 1 Pull out the LP tank tray and remove the tank, if not done so already. Align the new sheetmetal parts with the holes as shown below.