Installation Instructions

INSTALL TOP

5. Install the top. Get assistance from another person to help lift the top and position correctly.

Install 1/4-20 x 1/2” long hex bolts and flat washers where needed. When complete, apply a

bead of clear silicone sealant along the joint indicated.

APPLY SEALANT

ALONG THIS JOINT

HOLE FOR

OPTIONAL BEER

DISPENSER

GAS CONNECTIONS AND FINAL ASSEMBLY

ASSEMBLY OF THE SUITE IS NOW COMPLETE. YOU MAY NOW INSTALL THE APPLIANCES,

CABINETS, AND OTHER PRODUCTS AS PER THE INSTRUCTION MANUALS SUPPLIED WITH

THOSE PRODUCTS.

GAS SUPPLY

Gas connections should be made by a qualified plumber, or your professional outdoor appliance installer.

All fixed (non-mobile) appliances must be fitted with an accessible upstream gas shutoff valve as a means

of isolating the appliance for emergency shut off and for servicing. See reference photo at the end of this

manual.

Make certain new piping and connections have been made in a clean manner and have been purged so that

piping compound, chips, etc. will not clog regulators, valves, orifices, or burners. Use pipe joint compound /

thread sealant approved for natural and LP gases.

NEVER CONNECT THE GRILL OR SIDE BURNER TO AN UNREGULATED GAS SUPPLY. Before

proceeding, ensure the appliance is fitted for Natural or Liquid Propane gas. Connecting to an improper gas

type will result in poor performance and increased risk of damage or injury. Gas type and gas consumption

(BTU per hour) for each burner type is shown on the rating label affixed to each appliance.

Installation of this cooking appliance must be made in accordance with local codes. In the absence of local

codes, this unit should be installed in accordance with the National Fuel Gas Code No.

Z223.1/ NFPA 54

Natural Gas and Propane Installation code

CSA B149-1

, or Propane Storage and Handling Code B149.2.

NOTE: See rating label for manifold pressure for the type of gas of your appliance.

NOTE: If your Suite is to be connected to a Whole-House LP Piped System, please read the GAS

CONNECTIONS section of your Hestan Grill manual for information on this unique installation, and to

contact Hestan Customer Service to order an LP Piped System Kit.