User Manual

MOUNT GRILL ELECTRICAL BOX & LEFT PANEL

12. Mount the electrical box that came with your Hestan grill as shown and secure with #10 self-drilling

screws provided. Use the provided Wire Harness Extension (p/n 009938) to connect the box to

the grill wire harness. Arrange the wires in such a way to prevent damage during installation of the

grill, and from heat. At this point, it is also recommended the plumber run the gas connections for

the Grill and Side Burner (see pg. 17). As mentioned before, a gas shut-off valve must be located in

a readily accessible location for shut-off when the appliances are not in use, or for servicing. See

reference photos at the end of this manual.

13. Mount the lift-off panel on the left side of the suite. There are pins on either side for locating. The

louvers located on these side panels are needed for ventilation and must not be blocked. If this lift-

off panel does not install/remove easily, you may need to adjust the corner assembly to accomodate

(see Step 7).