Refreshment Center / Insulated Sink Installation Manual

©2020 Hestan Commercial Corporation
1
EN
REFRESHMENT CENTER /
INSULATED SINK
Installation Instructions
GRC / GRCHS / GIS / GISHS / AGIB
IMPORTANT - READ ALL INSTRUCTIONS BEFORE YOU BEGIN
INSTALLER SHOULD LEAVE THESE INSTRUCTIONS WITH THE HOMEOWNER
Some parts have sharp edges. Care must be taken when handling the various components to avoid
personal injury. Wear gloves when handling. The unit is heavy and awkward to move around. Two
people should work together to lift the unit into the cutout in your island.
TOOLS REQUIRED:
Work gloves
Safety glasses
Phillips screwdriver
Flat-blade screwdriver
7/16” wrench
Level
Tape measure
Plumbing tools for installation of Faucet & Drains
Inspect the product to verify that there is no shipping damage. If any damage is detected, call the shipper
and initiate a damage claim. Hestan Commercial Corp. is not responsible for shipping damage. DO NOT
discard any packing material (box, pallet, straps) until the unit has been inspected.
Remove all exterior packaging materials, banding, tape, etc. Remove all protective film from the inside of
your product. You may leave any exterior protective film on until after installation is complete.
CONFIGURATIONS
Your new Hestan Refreshment Center / Insulated Sink is offered in 4 different configurations, as well
as a separate Ice Bin accessory. Other accessories are available for purchase to further customize your
product. Please visit the Hestan website (www.hestanhome.com), or contact your Hestan dealer for
more information.
GRC30 GRCHS30 GIS30 GISHS30 AGIB

Summary of content (7 pages)