Installation Guide

RATING LABEL

The rating label contains important information about your Hestan appliance such as the model and

serial number, and refrigerant information if service is required.

The rating label is attached to the

inside top of the cabinet.

RATING LABEL

REGULATORY / CODE REQUIREMENTS

Installation of this appliance must be made in accordance with local codes. In the absence of

local codes, this unit should be installed in accordance with the National Electrical Code and

local codes.

This appliance must be electrically grounded in accordance with local codes or in the absence

of local codes with the National Electrical Code

ANSI/NFPA 70

, or Canadian Electrical code

CSA C22.1

SAFETY

CHILD SAFETYCHILD SAFETY

DANGER

Risk of child entrapment. Before you throw away your old refrigerator or freezer:

• Take off the doors

• Leave the shelves in place so that children may not easily climb inside.

NEVER allow children to play inside the appliance.

PRIOR TO INSTALLATIONPRIOR TO INSTALLATION

Carefully inspect cabinet for hidden damage. If damage is company discovered,

file your claim immediately with the transport company. Hestan is not responsible for damage in

transit.

When moving the unit, be sure to protect finished flooring with appropriate material to avoid

damage from moving the unit.

Do not lift unit by drawer, shelving or door handles, as damage to the unit could occur if not

moved as instructed.

To prevent personal injury, a minimum of two people are required to lift the unit. Larger units may

require additional personnel.

Before moving the unit, secure the door shut with tape to prevent door from swinging open while

being moved. Carefully move unit to installation site and place in front of opening.