Installation Instructions

EN
©2020 Hestan Commercial Corporation
7
INSTALLATION
(continued)
1. Make sure the space opening is correctly sized for the unit. See typical appliance dimensions
below, and the chart below for finished rough opening requirements:
HEIGHT WIDTH DEPTH
34-3/8” [87.3 cm] min.
35-1/2” [90.2 cm] max.
24” [61 cm] 24” [61 cm]
2. Check that the following are level and square:
Front and interior opening
Installation opening and floor surface
Countertop bottom front edge
NOTE: The floor under the unit must be at the same level as surrounding finished floor.
To prevent possible damage to the countertop, do not place heavy objects on countertop directly
over unit.
*34-
5
16
30-
3
8
23-
7
/
8
3-
5
16
24”
*6-
5
8
*3-
15
16
1-
15
16
22-
1
16
24-
15
16
MIN. CLEARANCE
FOR DOOR SWING
90° SWING
REQUIRED FOR
PULL-OUT SHELF
CLEARANCE
11”
POWER CORD
5 FT. LONG
CUTOUT DIMENSIONS:
34-
3
8
” H - 24” W - 24” D
3-
1
4
” MIN. CLEARANCE FROM A
CORNER TO ACHIEVE 90° SWING
*
- Leg levelers can add
3/4” to these dimensions
when fully extended.
TYPICAL APPLIANCE
DIMENSIONS