User Manual

ELECTRICAL SHOCK HAZARD

It is the responsibility of the user to have the appliance connected

by a licensed electrician in accordance with all applicable codes and

standards, including fire-related construction. See “Step 16 - WIRING

CONNECTION” on page17 for details.

ELECTRICAL SUPPLY AND GROUNDING

• This appliance must be grounded. See “Step 16 - WIRING CONNECTION” on page17 for

instructions.

• This appliance must be connected to 120 VAC Single Phase, 60 Hz, with a 20 amp dedicated

circuit.

• OWNER: Have the installer show you where the electric circuit breaker is located so you know

how to shut off the power to this appliance.

Suitable for use in covered outdoor applications when installed in a GFCI protected branch circuit.

TABLE OF CONTENTS

1 SAFETY PRECAUTIONS - BEFORE YOU BEGIN

4 MODEL NUMBERS

4 RATING LABEL

5 REGULATORY / CODE REQUIREMENTS

5 USING THE VENTILATION SYSTEM

6 CLEANING AND MAINTENANCE

9 TROUBLESHOOTING

10 DUCTING DO’S AND DON’TS

11 INSTALLATION

19 VENT ACCESSORIES

20 DUCT COVERS

21 PARTS / SERVICE

21 LIMITED WARRANTY

When properly cared for, your Hestan Outdoor ventilation system will provide safe, reliable service

for many years. When using this ventilation system, basic safety practices must be followed as

described in the following pages.

IMPORTANT: Save these instructions for the local Utility Inspector’s use.

INSTALLER: Please leave these Installation Instructions with the owner.

OWNER: Please read these Instructions and save them for future reference.

SAFETY PRECAUTIONS - BEFORE YOU BEGIN