Use & Care Manual

FEATURES AND CONTROLS (CONT.)
CONTROL PANEL DESCRIPTIONSCONTROL PANEL DESCRIPTIONS
ITEM DESCRIPTION
1
On/Off button
Press to switch the appliance on or off.
2
Program indicator lights
These show which program is selected and whether there are any faults (Troubleshooting)
3
Program selection button
Press repeatedly/as needed to select the required program. Also used to select water hardness adjustment
mode.
4
Add Salt indicator light
When ON, indicates the appliance has run out of salt.
When FLASHING, indicates that the appliance is in water hardness adjustment mode.
5
Add Rinse-Aid indicator light
When ON, indicates the appliance has run out of rinse-aid.
6
Quick Wash option button
Press this button to start one of the quick wash programs (see Wash Cycles table).
7
Quick Wash programs indicator light
Shows that one of the Quick Wash programs (6-10) will be run.
8
Energy Saver option button
Option to reduce energy consumption by opening dishwasher door at end of cycle for drying.
9 ON when the Energy Saver option has been selected.
10
Half Load option button
Press to select the half load option
11 ON when the Half Load option has been selected.
12
Sanitation indicator light
Shows that sanitation has been completed (see notes in the programs table)
13
Delay Start button
Press to delay the start of the program up to 24 hours
14 Information display
Crystal
Delicate
Daily Wash
Super/
Sanitize
Soak Salt
Rinse Aid
Select
ADD
1/2 Load
Sanitize
Energy Saver Quick Wash Delay Start
2
3
9 8 7 6 14 13 11011
12
4 5
©2021 Hestan Commercial Corporation
10
EN