Use & Care Manual

HALF LOADHALF LOAD

Suitable when there are not many dishes to be washed, it saves energy and reduces the program

duration. Place dishes in both baskets, then load the detergent dispenser (see “USING THE

RINSE-AID AND DETERGENT DISPENSERS” on page19) less than the normal amount for a

full load. Press the Half Load button (item 10 on page 10) so the Half Load indicator illuminates

(item 11, same page).

ENERGY SAVERENERGY SAVER

This option can be selected with the wash cycle of choice to further reduce energy consumption.

Drying is aided by a special device that automatically releases the door, which opens slowly

and smoothly by about an inch. This ensures perfect drying and greater control of rinsing

temperatures, which can be kept at lower levels for significant energy saving. Once the door has

opened, the end of the wash cycle is indicated by a short beep.

Energy Saver is activated automatically every time a wash cycle is selected (except for cycles that

do not include the final drying phase) and can be disabled before the cycle is started.

When the function is activated, opening of the door must not be impeded in

any way. Do not leave anything in the space in front of the door necessary

to allow it to open.

Do not re-close the door during automatic opening as this would damage the mechanism. Wait

for the mechanism to retract before re-closing the door.

TURNING OFFTURNING OFF

At the end of the cycle, the dishwasher emits a short beep and the indicators of the fourth and

fifth cycle flash. Turn off the appliance by opening the door and pressing the ON/OFF button.

ENERGY MANAGEMENTENERGY MANAGEMENT

After 5 minutes of waiting (wash cycle completed, stopped or set but not started) the dishwasher

switches to a standby state to reduce energy consumption.

In this state, the dishwasher indicator panel (lights/display) functions more intermittently,

switching on every 5 seconds.

Delicate

Daily Wash

Super/

Sanitize

Crystal

Soak

OPERATION

(CONT.)