Use & Care Manual
ManualsBrandsHestan ManualsBuilt-In Dishwashers24 Inch Fully Integrated Built-In Dishwasher with 13 Place Settings, 10 Wash Cycles, Full-Sized 3rd Rack, 42 dBA Quiet Operation, Double Axial Washing System™, AquaLeak Detection Technology™, Marquise Accented™ Handle, Auto Door-Open Drying, Interior Ligh
Table Of Contents
- PRÉCAUTIONS DE SÉCURITÉ - AVANT DE COMMENCER
- NUMÉROS DE MODÈLE
- PLAQUE SIGNALÉTIQUE
- EXIGENCES RÉGLEMENTAIRES / CODE
- AVERTISSEMENTS SUR LE PRODUIT / SÉCURITÉ
- CARACTÉRISTIQUES ET COMMANDES
- OPÉRATION
- NETTOYAGE ET ENTRETIEN PAR L’UTILISATEUR
- DÉPANNAGE
- PIÈCES / SERVICE
- GARANTIE LIMITÉE
- SAFETY PRECAUTIONS - BEFORE YOU BEGIN
- MODEL NUMBERS
- RATING LABEL
- REGULATORY / CODE REQUIREMENTS
- PRODUCT WARNINGS/SAFETY
- FEATURES AND CONTROLS
- OPERATION
- CLEANING AND USER MAINTENANCE
- TROUBLESHOOTING
- PARTS / SERVICE
- LIMITED WARRANTY
LOADING THE UPPER RACKLOADING THE UPPER RACK
Load plates facing forward - cups, bowls etc. must always be facing downwards. The left-hand
side of the rack can be loaded with two layers of cups and glasses. The center can be filled with
plates and small plates, fitted upright into the supports provided.
ADJUSTING THE UPPER RACKADJUSTING THE UPPER RACK
The upper rack can set in three different positions on both sides. The rack must be level on both
sides.
To raise the rack, lift it to the first or second catch, depending on the height required.
To lower the rack, pull up on the two release levers. This is also possible with the rack loaded, but
in this case, when lowering the rack it should be held firmly to avoid hitting other items below it.
Loading examples:
RELEASE
LEVER
OPERATION
(CONT.)
©2021 Hestan Commercial Corporation
28
EN