Use & Care Manual
ManualsBrandsHestan ManualsBuilt-In Dishwashers24 Inch Fully Integrated Built-In Dishwasher with 13 Place Settings, 10 Wash Cycles, Full-Sized 3rd Rack, 42 dBA Quiet Operation, Double Axial Washing System™, AquaLeak Detection Technology™, Marquise Accented™ Handle, Auto Door-Open Drying, Interior Ligh
Table Of Contents
- PRÉCAUTIONS DE SÉCURITÉ - AVANT DE COMMENCER
- NUMÉROS DE MODÈLE
- PLAQUE SIGNALÉTIQUE
- EXIGENCES RÉGLEMENTAIRES / CODE
- AVERTISSEMENTS SUR LE PRODUIT / SÉCURITÉ
- CARACTÉRISTIQUES ET COMMANDES
- OPÉRATION
- NETTOYAGE ET ENTRETIEN PAR L’UTILISATEUR
- DÉPANNAGE
- PIÈCES / SERVICE
- GARANTIE LIMITÉE
- SAFETY PRECAUTIONS - BEFORE YOU BEGIN
- MODEL NUMBERS
- RATING LABEL
- REGULATORY / CODE REQUIREMENTS
- PRODUCT WARNINGS/SAFETY
- FEATURES AND CONTROLS
- OPERATION
- CLEANING AND USER MAINTENANCE
- TROUBLESHOOTING
- PARTS / SERVICE
- LIMITED WARRANTY
CLEANING AND USER MAINTENANCE
(CONT.)
IF THE DOOR DOES NOT CLOSEIF THE DOOR DOES NOT CLOSE
1. Check the position of the door lock
catch (D). The catch must be adjusted
to maintain a minimum gap from the
tank, without touching it.
2. If the catch is too low, rotate the
screw V counter-clockwise step by
step, until at the minimum gap from
the tank without touching it.
3. If the catch is too high, rotate the
screw V clockwise step by step, until
at the minimum gap from the tank
without touching it.
4. Check the condition of
the lock hook shown
here. If it has not
triggered (reference
N), the door opens and
closes normally.
If it has triggered
(reference S), close the
door with force until it
resets. Open and close
the door.
©2021 Hestan Commercial Corporation
32
EN