Installation Sheet

©2018 Hestan Commercial Corporation
4
EN
D
G
C
E
F
Cutout width D E F G
30”
[76.2cm]
18” [45.7 cm] min
Height from counter-
top to nearest cabinet
on either side of unit
2” [5 cm] min Clearance
from cutout to side wall
on the left and right of
the unit
13” [33 cm] Depth
of unprotected
overhead cabinets
36”
[91.4cm]
Cutout width A B C
30”
[76.2cm]
28-3/4” +/- 1/16”
[73.0 cm +/- 0.1cm]
19-7/16” +/- 1/16”
[49.4 cm +/- 1mm]
30”
[76.2 cm] min
36”
[91.4cm]
34-5/8” +/- 1/16”
[87.9 cm +/- 0.1cm]
19-7/16” +/- 1/16”
[49.4 cm +/- 1mm]
36”
[91.4 cm] min
NOTE: 24” [61 cm] min. clearance if bottom of wood or
metal cabinets is protected by not less than 1/4” [0.6 cm]
flame retardant millboard covered with no less than No. 28
MSG sheet steel 0.015” [0.04 cm] stainless steel, or 0.024”
[0.06 cm] aluminum or 0.020” [0.05 cm] copper. 30” [76.2
cm] min. clearance between top of cooking platform and
bottom of unprotected wood or metal cabinet.
Under the cooktop it is necessary to install a
partition, as shown.
WALL COVERING CABINETS,
AND COUNTERTOP MUST
WITHSTAND HEAT UP TO 200° F [93° C]
CUTOUT REQUIREMENTS
30” [76.2 cm] min.
[see note*] Clearance
from countertop to
unprotected
overhead surface
NOTICE
CUTOUT DIMENSIONS AND REQUIREMENTS (CONT.)