Installation Guide

©2018 Hestan Commercial Corporation
5
EN
min
Important Preparation Suggestions
1. Chamfer all exposed edges of decorative laminate to
prevent damage from chipping.
2. Radius corners of cutout and file to ensure smooth edges
and prevent corner cracking. Recommend 1/4” or 3/8”
diameter drill to start cut at each corner.
3. Rough edges, inside corners which have not been rounded
and forced fits can contribute to cracking of the countertop
laminate.
VERTICAL CLEARANCES
* The ventilation opening is to extend the full length of the cooktop cutout.
25” [635 mm]
min
”
2 1/2”
[64mm]
3
”
[76 mm]
2 1/2”
[65 mm]
1 5/8”
[40 mm]
max
1/4”
[6 mm]
min
36”
[915 mm]
24” [610 mm]
15 3/4”
[400 mm]
5”
[127 mm]
min
*1/4”
[6 mm]
min
min
19 7/16 [494 mm]
1 1/2
4 3/4
[120 mm]
[38 mm]
min
”
”
4”
[101 mm]
min
Partitian
CUTOUT DIMENSIONS AND REQUIREMENTS (CONT.)