Installation Manual

©2018 Hestan Commercial Corporation
10
ELECTRICAL AND WATER CONNECTION
(continued)
LOCATION AND INSTALLATION
E
W
E
W
E
W
E
W
E
W
E
W
The appliances are delivered from the factory for operation at 110V-
120V AC - 60Hz (US and Canada).
They are provided with a suitable supply cable and plug to be con-
nected to an appropriate 15A socket (US and Canada) provided
with an effective grounding.
A circuit breaker should also be installed and should be easily ac-
cessible so that it can be easily switched off before performing any
installation or maintenance.
To connect to the water supply system (for appliances equipped with
ice makers) a 1/4” waterline with accessible shut-off valve must be
supplied.
The appliance is provided with a water adapter elbow which is suit-
able for high water pressure and complies the Food Regulations.
The water lter cartridge , which is provided with the appliance
should be installed according to the accompanying instructions. Use
only the new adapter which is supplied with the appliance. The so-
lenoid connection on the appliance is 3/4” diameter but is metric
threaded. A standard garden hose threaded connector such as a
braided stainless hose found at typical hardware stores will strip or
damage the solenoid threads. Use only the supplied 1/4” quick con-
nect elbow adapter for connecting a 1/4” copper or polyethylene
source water line to the appliance.
Electrical cord length: 2000 mm (78 3/4”)
Water connection line length: 2500 mm (98 3/8”)
Do not use extension cords and/or multiple adapters for the power
supply connection.
The appliance should be connected only to
a drinkable water supply system.
to drink any water which is not suitable for
human consumption.
Electrical and water supply behind the unit
Do not use extension cords or adapters.
Once the appliance is fully installed, con-
nected to the water supply (if applicable) and
operational, in the event that the water sup-
ply must be turned off,(touch the button
on
control panel to switch it off) before the main
water is shut off to prevent the appliance from
entering a ‘NO WATER IN’ alarm state.
The built-in Hestan lter cannot make it safe
KRP Models
All other Models
EN