Use and Care

The View Status function permits visualizing the time left before the

lter needs to be replaced.

The Reset Filter function sets to zero the time left before the

lter needs to be replaced. It is necessary to set the meter to zero

each time the cartridge is replaced.

This function is to be activated when it is not necessary to lter

the water because excellent quality water is already available from

the home water system.

If ice production has been disabled or unused for a long period it is-

recommended to perform a Manual Clean function to ush out

water which has salt in the system during this period. Repeat the

operation until the water is clean.

Before proceeding it is important to turn off the ice maker by

pressing the Ice button.

Correctly position the ice tray or another suitable

container under the IceMaker to collect water,

then close the drawer. At the end of the operation,

wash the tray.

How to check the status of the

lter

How to set the ltered water

meter to zero

How to activate lter Bypass

How to manually clean the lter

(continued)

GETTING TO KNOW YOUR REFRIGERATOR

SPECIAL SETTINGS AND FUNCTIONS

WATER FILTER

RESET FILTER

BYPASS FILTER

MANUAL CLEAN WATER FILTER

(continued)