Use and Care

The display shows the hours and minutes in the format hh:mm and with

hh: blinking. Use the Up/Down buttons to modify the setting and then

conrm by pressing Enter to go on to the next setting.

Once the minutes are conrmed, the time will be set.

How to set the time

This offers the possibility to reset default factory settings and cancels

any previous changes.

How to reset default settings

Using this function it is possible to deactivate/activate the date being

shown on the display.

How to activate the date

How to deactivate the date

The display will show the date in the format dd:mm:yy (day:month:year),

the day will blink. Use the Up/Down buttons

to modify the setting,

conrm rm with Enter to go on to the next setting; once the year is

conrmed the date will be set.

How to set the date

Select the Menu button and use the Up/Down button

to select Fresh Zone.

The freezer compartment can, if required, be converted to refrigeration

or Fresh operating mode.

How to set the Fridge function

How to set the Fresh function

How to revert to the Freezer function

ATTENTION: If the default settings are restored, the

default mode of the Fresh Zone compartment is freezer

mode. If it was previously being used in refrigerator

or Fresh mode be sure to set it back to your desired

setting.

GETTING TO KNOW YOUR REFRIGERATOR

(continued)

FRESH ZONE OPTIONS

DEFAULT SETTINGS

DATE SETTINGS

SPECIAL SETTINGS AND FUNCTIONS

(continued)