Use and Care Manual
Table Of Contents
- SAFETY PRECAUTIONS - BEFORE YOU BEGIN
- MODEL NUMBERS
- RATING LABEL
- REGULATORY / CODE REQUIREMENTS
- GETTING STARTED WITH YOUR APPLIANCE
- USING THE RANGETOP
- USING THE GRIDDLE (SOME MODELS)
- USING THE OVEN
- OVEN CONTROLS
- ADDITIONAL ITEMS
- CARE & MAINTENANCE
- TROUBLESHOOTING GUIDE
- PARTS LIST
- SERVICE
- LIMITED WARRANTY
- PRÉCAUTIONS DE SÉCURITÉ - AVANT DE COMMENCER
- NUMÉROS DE MODÈLE
- PLAQUE SIGNALÉTIQUE
- RESPECT DE LA RÉGLEMENTATION ET DES CODES EN VIGUEUR
- COMMENT COMMENCER AVEC VOTRE APPAREIL
- UTILISATION DE LA TABLE DE CUISSON
- UTILISATION DE LA PLAQUE CHAUFFANTE (CERTAINS MODÈLES)
- UTILISATION DU FOUR
- COMMANDES DU FOUR
- ÉLÉMENTS SUPPLÉMENTAIRES
- NETTOYAGE ET ENTRETIEN
- GUIDE DE DÉPANNAGE
- LISTE DES PIÈCES
- SERVICE
- GARANTIE LIMITÉE
©2020 Hestan Commercial Corporation
32
EN
OVEN CONTROLS
(CONTINUED)
SETTING DELAYED STARTSETTING DELAYED START
1. Activate the display by touching and
holding for 2 seconds. Touch the Menu
icon.
2. Touch the ADVANCED button.
3. Touch the DELAY SRT button.
4. Touch the UP and DOWN arrows to set
the hour time you want to start, then touch
HOUR to set. If 0 hours are desired, just
touch the HOUR button.
5. Touch the UP and DOWN arrows to set
the minute time you want to start, then
touch MINUTE to set. In this example, we
want to start cooking at 4:30.
NOTES:
a. There is a 2 minute waiting period when
the user has set an advanced cooking mode
(Timed Cook or Delayed Start), but has not
yet selected a Mode or Temperature setting.
b. Delay Start supercedes Timed Cook and
Probe Cook in the case where either or both
have been set.
c. Preheat is not used / does not apply to any
cooking modes when Delay Start is used.
6. Touch AM or PM, then touch ENTER.
NOTE: This step is skipped when the clock is set
to 24 hr display.
7. The display will revert back to the default
display showing the delayed start time. It
shows cooking will start at 4:30PM.