Use and Care Manual

REGULATORY / CODE REQUIREMENTS

Installation of this cooking appliance must be made in accordance with local codes. In the absence

of local codes, this unit should be installed in accordance with the National Fuel Gas Code

ANSI

Z223.1/NFPA 54

, Natural Gas and Propane Installation code

CSA B149.1

, or Propane Storage and

Handling Code

B149.2

All Electrical Components must be electrically grounded in accordance with local codes or in the

absence of local codes with the National Electrical Code

ANSI/NFPA 70

, or Canadian Electrical code

CSA C22.1

STATE OF MASSACHUSETTS

Massachusetts requires all gas be installed using a plumber or gas fitter carrying the appropriate

Massachusetts license. All permanently installed natural gas or propane installations require a

T-handle type manual gas valve be installed in the gas supply line to this appliance. Flexible gas

connector must not be longer than 48” [1.2 m].

CALIFORNIA PROPOSITION 65 - WARNING

WARNINGWARNING This product can expose you to chemicals including carbon monoxide, which is

known to the State of California to cause birth defects or other reproductive harm.

For more information, go to www.P65Warnings.ca.gov.

RATING

LABEL

RATING LABEL

The rating label contains important information about your

Hestan appliance such as the model and serial number, gas type

and manifold pressure, electrical rating, the BTU rating for each

burner type, and the minimum installation clearances.

The rating label is located in one of two places, as shown in the

figures on this page.

If service is necessary, contact Hestan Customer Care with the

model and serial number information shown on the label.

RATING LABEL