Use and Care

GETTING STARTED WITH YOUR APPLIANCE

(CONTINUED)

BURNER HEADS

If the burner head is not properly positioned, one or more of the following issues may occur:

• Flames too high

• Flames shoot out of the burners

• Burners do not ignite

• Flames are uneven

• Burner emits a gas odor

BURN HAZARD - To prevent burns, do not touch the burner heads or cooking grates when hot.

Allow to cool completely. To prevent flare-ups, do not use the burner without all the burner heads in

place and properly positioned. Do not use aluminum foil to line the surface burners. Doing so may

result in a risk of electric shock, or fire.

BURNER GRATES

See image for proper placement

of the burner grates. There are

small round embosses at the

front and rear of the burner

bowl to help align the grates

and keep them in position

relative to one-another.

GRIDDLE PLATE

(GD models)

See image for proper placement

of the Griddle Plate and Grease

Tray. You can check for proper

incline of the plate by pouring

a small amount of water on the

plate to watch it slowly roll

toward the grease tray at the

front. If adjustment is needed,

lift the plate and adjust the

2 rear screws beneath. Begin

with 1/2-turn CCW rotations

until you achieve the desired

result.

The plate is made of stainless-

steel and requires no seasoning.

The grease tray has a non-stick

coating for easy cleaning.

GREASE

TRAY

GRIDDLE

PLATE

COVER