Use & Care Guide
Table Of Contents
- SAFETY PRECAUTIONS - BEFORE YOU BEGIN
- MODEL NUMBERS
- RATING LABEL
- REGULATORY / CODE REQUIREMENTS
- GETTING STARTED WITH YOUR APPLIANCE
- USING THE RANGETOP
- USING THE GRIDDLE (SOME MODELS)
- USING THE OVEN
- OVEN CONTROLS
- ADDITIONAL ITEMS
- CARE & MAINTENANCE
- TROUBLESHOOTING GUIDE
- PARTS LIST
- SERVICE
- LIMITED WARRANTY
- PRÉCAUTIONS DE SÉCURITÉ - AVANT DE COMMENCER
- NUMÉROS DE MODÈLE
- PLAQUE SIGNALÉTIQUE
- RESPECT DE LA RÉGLEMENTATION ET DES CODES EN VIGUEUR
- COMMENT COMMENCER AVEC VOTRE APPAREIL
- UTILISATION DE LA TABLE DE CUISSON
- UTILISATION DE LA PLAQUE CHAUFFANTE (CERTAINS MODÈLES)
- UTILISATION DU FOUR
- COMMANDES DU FOUR
- ÉLÉMENTS SUPPLÉMENTAIRES
- NETTOYAGE ET ENTRETIEN
- GUIDE DE DÉPANNAGE
- LISTE DES PIÈCES
- SERVICE
- GARANTIE LIMITÉE
©2021 Hestan Commercial Corporation
22
EN
PAIRING WITH THE COOKTOP PAIRING WITH THE COOKTOP
See the KNOB / COOKWARE SETUP section on page 23 for details.
NON-CUE COOKWARENON-CUE COOKWARE
Traditional cookware may be used on the Smart Burner
TM
, but only in Manual Mode. See
COOKWARE RECOMMENDATIONS on page 18 for details.
UPDATESUPDATES
You may need to update the firmware on your cooktop and cookware. The Smart Burner
TM
system
will routinely check for updates using the on-board WiFi connections if the system has been enabled.
This will ensure proper functionality as well as introduce new features when available. Proper setup
of the WiFi is required to enable this feature.
Hestan Cue cookware can be updated by downloading and connecting your cookware to the Hestan
Cue application. This will require the user to open the app periodically to connect to the pan and
check for updates. However, this is not required to use the cookware.
THERMOSTATIC COOKING CONTROL MODETHERMOSTATIC COOKING CONTROL MODE
Once cookware is connected, desired temperature can be set through the control knob interface.
Once temperature is reached, the smart system will modulate the flame to maintain set point. This
set point can be changed at any time by rotating the knob. See OPERATION - THERMOSTATIC
MODE on page 28 for details.
• Errors that occur while connected to the Smart Burner
TM
will appear on the knob display.
SMART BURNER
TM
(CONTINUED)