Use & Care Manual
Table Of Contents
- SAFETY PRECAUTIONS - BEFORE YOU BEGIN
- MODEL NUMBERS
- RATING LABEL
- REGULATORY / CODE REQUIREMENTS
- GETTING STARTED WITH YOUR APPLIANCE
- USING THE RANGETOP
- USING THE GRIDDLE (SOME MODELS)
- USING THE OVEN
- OVEN CONTROLS
- ADDITIONAL ITEMS
- CARE & MAINTENANCE
- TROUBLESHOOTING GUIDE
- PARTS LIST
- SERVICE
- LIMITED WARRANTY
- PRÉCAUTIONS DE SÉCURITÉ - AVANT DE COMMENCER
- NUMÉROS DE MODÈLE
- PLAQUE SIGNALÉTIQUE
- RESPECT DE LA RÉGLEMENTATION ET DES CODES EN VIGUEUR
- COMMENT COMMENCER AVEC VOTRE APPAREIL
- UTILISATION DE LA TABLE DE CUISSON
- UTILISATION DE LA PLAQUE CHAUFFANTE (CERTAINS MODÈLES)
- UTILISATION DU FOUR
- COMMANDES DU FOUR
- ÉLÉMENTS SUPPLÉMENTAIRES
- NETTOYAGE ET ENTRETIEN
- GUIDE DE DÉPANNAGE
- LISTE DES PIÈCES
- SERVICE
- GARANTIE LIMITÉE
©2019 Hestan Commercial Corporation
30
EN
OVEN CONTROLS
(CONTINUED)
SETTING FAHRENHEIT / CELSIUS
1. Activate the display by touching and
holding for 2 seconds. Touch the Menu
icon.
2. Touch the ADVANCED button.
3. Touch the °F / °C button.
4. Touch the °F or °C button and touch
ENTER.
5. The display will revert back to the main
display.
NOTES:
a. The factory default is degrees Fahrenheit.
b. On dual oven models (KRD48), the F or C is
set by using the main oven’s display, not the
companion oven display.
6. Depending on the selection, the letter F or
C will be shown under the degree symbol
during cooking.