Use and Care Guide
Table Of Contents
- SAFETY PRECAUTIONS - BEFORE YOU BEGIN
- MODEL NUMBERS
- RATING LABEL
- REGULATORY / CODE REQUIREMENTS
- GETTING STARTED WITH YOUR APPLIANCE
- USING THE RANGETOP
- USING THE GRIDDLE (SOME MODELS)
- USING THE OVEN
- OVEN CONTROLS
- ADDITIONAL ITEMS
- CARE & MAINTENANCE
- TROUBLESHOOTING GUIDE
- PARTS LIST
- SERVICE
- LIMITED WARRANTY
- PRÉCAUTIONS DE SÉCURITÉ - AVANT DE COMMENCER
- NUMÉROS DE MODÈLE
- PLAQUE SIGNALÉTIQUE
- RESPECT DE LA RÉGLEMENTATION ET DES CODES EN VIGUEUR
- COMMENT COMMENCER AVEC VOTRE APPAREIL
- UTILISATION DE LA TABLE DE CUISSON
- UTILISATION DE LA PLAQUE CHAUFFANTE (CERTAINS MODÈLES)
- UTILISATION DU FOUR
- COMMANDES DU FOUR
- ÉLÉMENTS SUPPLÉMENTAIRES
- NETTOYAGE ET ENTRETIEN
- GUIDE DE DÉPANNAGE
- LISTE DES PIÈCES
- SERVICE
- GARANTIE LIMITÉE
© 2021 Hestan Commercial Corporation
25
EN
SMART BURNER
TM
- SETUP
(CONTINUED)
KNOB / COOKWARE SETUP KNOB / COOKWARE SETUP
(CONTINUED)(CONTINUED)
The other available settings are shown below:
Firmware: xxxxx
Serial: xxxxx
Program: xxxxx
If entering
Info
Fry
Pan
Tap Pan
3.5
QT
5.5
QT
If entering
Pan Registration
FACTORY
RESET?
Confirm
If entering
Factory Reset
Rotate to the Info icon and tap to
select. Technical data is shown
here which may be used by service
personnel. Tap
XX to go back.
Rotate to the Pan Registration
icon and tap to select. Tap on
the type of cookware you want
to register (default is Fry Pan).
Follow prompt displayed on the
knob.
After the pan has been
registered, the central word “Tap
Pan” will change to “Registered”.
Tap
XX to exit the screen.
Rotate to the Reset icon and tap to
select. Tap on the Confirm icon to
verify you wish to reset the knob
back to factory settings. Tap
XX to
return to previous screen without
saving changes.
Note: This action will erase all your
pan registrations, WiFi settings,
etc., and revert back to the factory
firmware, removing any updates.