Use and Care

©2018 Hestan Commercial Corporation
12
EN
GETTING STARTED WITH YOUR APPLIANCE (CONTINUED)
SEALED BURNERS
Ensure the sealed burner heads are properly installed and seated on the burner base as shown
below. There are notches on the burner base and cross ring to help with alignment. The outer
burner head features a long slot on the top of the head which aligns with the spark igniter.
Assembly of the single-flow burner head is similar.
FIRST TIME OPERATION
When using your rangetop for the first time, any manufacturing oils and residues on the grates will
be burned off. This may produce a little smoke and some odor. This is normal and is typical of any
new appliance when first used. If the smell is strong, remove persons and animals from the kitchen
during this period. Open any windows to further vent the odor from the room.
Ensure there are no packaging materials remaining. Remove any labels or plastic film from the
outside of the appliance. Install all the cooking grates and griddle plate (if equipped).
BURNER HEADS
If the burner head is not properly positioned, one or more of the following issues may occur:
• Flames too high
• Flames shoot out of the burners
• Burners do not ignite
• Flames are uneven
• Burner emits a gas odor
BURN HAZARD - To prevent burns, do not touch the burner heads or cooking grates when hot.
Allow to cool completely. To prevent flare-ups, do not use the burner without all the burner heads
in place and properly positioned. Do not use aluminum foil to line the surface burners. Doing so
may result in a risk of electric shock, or fire.
BURNER
RING
BURNER
HEAD
BURNER
BASE
IGNITER
INNER
BURNER
HEAD
OUTER
BURNER
HEAD
BEAUTY
RING
CROSS
RING
BURNER
BASE
DUAL FLOW
BURNER
SINGLE FLOW
BURNER