Use and Care

©2018 Hestan Commercial Corporation
13
EN
GETTING STARTED WITH YOUR APPLIANCE (CONTINUED)
BURNER GRATES
See image for proper placement
of the burner grates. There are
small round embosses at the
front and rear of the burner
bowl to help align the grates
and keep them in position
relative to one-another.
GRIDDLE PLATE
(GD models)
See image for proper placement
of the Griddle Plate and Grease
Tray. You can check for proper
incline of the plate by pouring
a small amount of water on the
plate to watch it slowly roll
toward the grease tray at the
front. If adjustment is needed,
lift the plate and adjust the
2 rear screws beneath. Begin
with 1/2-turn CCW rotations
until you achieve the desired
result.
The plate is made of stainless-
steel and requires no seasoning.
The grease tray has a non-stick
coating for easy cleaning.
GREASE
TRAY
GRIDDLE
PLATE
COVER