Installation Manual

ELECTRICAL AND WATER CONNECTION

(continued)

LOCATION AND INSTALLATION

The appliances are delivered from the factory for operation at 110V-

120V AC - 60Hz (US and Canada).

They are provided with a suitable supply cable and plug to be con-

nected to an appropriate 15A socket (US and Canada) provided

with an effective grounding.

A circuit breaker should also be installed and should be easily ac-

cessible so that it can be easily switched off before performing any

installation or maintenance.

To connect to the water supply system (for appliances equipped with

ice makers) a 1/4” waterline with accessible shut-off valve must be

supplied.

The appliance is provided with a water adapter elbow which is suit-

able for high water pressure and complies the Food Regulations.

The water lter cartridge , which is provided with the appliance

should be installed according to the accompanying instructions. Use

only the new adapter which is supplied with the appliance. The so-

lenoid connection on the appliance is 3/4” diameter but is metric

threaded. A standard garden hose threaded connector such as a

braided stainless hose found at typical hardware stores will strip or

damage the solenoid threads. Use only the supplied 1/4” quick con-

nect elbow adapter for connecting a 1/4” copper or polyethylene

source water line to the appliance.

Electrical cord length: 2000 mm (78 3/4”)

Water connection line length: 2500 mm (98 3/8”)

Do not use extension cords and/or multiple adapters for the power

supply connection.

The appliance should be connected only to

a drinkable water supply system.

to drink any water which is not suitable for

human consumption.

Electrical and water supply behind the unit

Do not use extension cords or adapters.

Once the appliance is fully installed, con-

nected to the water supply (if applicable) and

operational, in the event that the water sup-

ply must be turned off,(touch the button

control panel to switch it off) before the main

water is shut off to prevent the appliance from

entering a ‘NO WATER IN’ alarm state.

The built-in Hestan lter cannot make it safe

KRP Models

All other Models