QuickSpecs HP ProLiant DL160 Gen8 Overview The HP ProLiant DL160 Gen8 is a dual-socket, high-performance, dense rack server with enhanced manageability and scalability suited for High Performance Computing (HPC) environments, web serving and other hyperscale environments. Hot Plug SAS/SATA Front View: 1. Access panel 2. Power supply (500 Watts multi-output - standard, common slot power supply factory installable options available) 3. Up to two Intel® Xeon® E5-2600 Series processors 4. FlexibleLOM slot 5.
QuickSpecs HP ProLiant DL160 Gen8 Standard Features NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section. Processor Eight -Core Processors One of the following Intel® Xeon® E5-2680 (2.7GHz/8-core/20MB/8GT-s QPI/130W, DDR3-1600, HT, Turbo2depending on Model 4/4/5/5/5/7/8/8) Intel® Xeon® E5-2670 (2.6GHz/8-core/20MB/8GT-s QPI/115W, DDR3-1600, HT, Turbo24/4/5/5/6/6/7/7) Intel® Xeon® E5-2665 (2.
QuickSpecs HP ProLiant DL160 Gen8 Standard Features Cache Memory One of the following depending on Model 20MB (1x20MB) Level 3 cache NOTE: For Eight-core processors. 15MB (1x15MB) Level 3 cache NOTE: For Six-core processors. 10MB (1x10MB) Level 3 cache NOTE: For Quad-core processors. 5MB (1x5MB) Level 3 cache NOTE: For Dual-core processors. NOTE: All processor models above list the L3 Cache associated with that particular processor.
QuickSpecs HP ProLiant DL160 Gen8 Standard Features a server. The majority of ProLiant Gen8 servers support RDIMM, UDIMM and LRDIMM. NOTE: If only one processor is installed, only 12 DIMM slots are available. When populating with two processors 24 DIMM slots are available. For maximum speed on some memory options on 16 DIMM slots may be populated. NOTE: Depending on the memory configuration and processor model, the memory speed may run at 1600MHz, 1333MHz, or 1066MHz.
QuickSpecs HP ProLiant DL160 Gen8 Standard Features Storage Controller One of the following depending on Model Entry Models Embedded SATA controller Base Models Embedded SATA controller Performance Models HP Smart Array P420/1GB FBWC controller NOTE: Available upgrades: 2GB FBWC for P420 Controller/ 1GB FBWC controller NOTE: Embedded SATA controller supports up to 3Gb/s speed in HP ProLiant DL160 Gen8. HP Smart Array controller is required to achieve 6Gb/s.
QuickSpecs HP ProLiant DL160 Gen8 Standard Features Industry Standard Compliance ACPI 2.0 Compliant PCIe 3.0 Compliant PXE Support WOL Support Microsoft® Logo certifications IPMI 2.0, SMASH CLP, DCMI 1.0 compliant USB 2.0 Support Server Power Cords One 6' Highline (IEC-IEC) power cord ships standard NOTE: HP ProLiant DL servers no longer ship standard with a 12-foot NEMA 5-15P to C13 power cords that allow connection to 110V US wall outlets in a home or office.
QuickSpecs HP ProLiant DL160 Gen8 Standard Features NOTE: 10GbE FlexibleLOM mandatorily need common slot power supply and are not supported with 500W M/O power supply. These FlexibleLOM require Aux power connector that comes with the common slot power supply. Please see the options section for specific details. NOTE: Since DL160 Gen8 only has only one power supply slot, above mentioned power supplies will not be Hot Plug in case of DL160 Gen8.
QuickSpecs HP ProLiant DL160 Gen8 Standard Features On System Management HP iLO Management Engine HP iLO Management Engine is a complete set of embedded management features supporting the complete lifecycle of the server, from initial deployment, through ongoing management, to service alerting and remote support. HP iLO Management Engine comes standard on all HP ProLiant Gen8 Servers.
QuickSpecs HP ProLiant DL160 Gen8 Standard Features HP Insight management software HP Service Pack for ProLiant (SPP) HP Service Pack for ProLiant (SPP) and HP Smart Update Manager (HP SUM) version 5 provide a new, comprehensive approach to firmware and system software maintenance. Together they provide better operating stability and ensure maximum uptime. The SPP will be updated at a predictable cadence, typically coinciding with new HP server hardware launches.
QuickSpecs HP ProLiant DL160 Gen8 Standard Features Warranty This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and parts replacement is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements.
QuickSpecs HP ProLiant DL160 Gen8 Optional Features HP Insight management software HP Insight Control HP Insight Control, a product option, delivers essential infrastructure management that can help save time and money by making it easy to deploy, migrate, monitor, remote control, and optimize your IT infrastructure through a single, simple management console.
QuickSpecs HP ProLiant DL160 Gen8 Optional Features High Performance Clusters HP Cluster Platforms HP HPC Interconnects HP Cluster Platforms are specifically engineered, factory-integrated largescale ProLiant clusters optimized for High Performance Computing, with a choice of servers, networks and software. Operating system options include specially priced offerings for Red Hat Enterprise Linux and SUSE Linux Enterprise Server, as well as Microsoft Windows HPC Server.
QuickSpecs HP ProLiant DL160 Gen8 Service and Support Service and Support HP Technology Services for Industry Standard Servers and BladeSystem Capitalizing on HP ProLiant server and HP BladeSystem capabilities requires a service partner who understands your increasingly complex business technology environment. That's why it makes sense to team up with the people who know HP infrastructure hardware and software best - the experienced professionals at HP Services.
QuickSpecs HP ProLiant DL160 Gen8 Service and Support Standard Care Package Support recommendation that maintains high level of server availability HP ProLiant Server Hardware Installation Provides for the basic hardware installation of HP branded servers, storage devices and networking options to assist you in bringing your new hardware into operation in a timely and professional manner. http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN.
QuickSpecs HP ProLiant DL160 Gen8 Service and Support Warranty / Service Coverage For ProLiant servers and storage systems, the services cover HP-branded hardware options qualified for the server, purchased at the same time or afterward, internal to the enclosure, as well as external monitors up to 22" and tower UPS products; these items will be covered at the same service level and for the same coverage period as the server unless the maximum supported lifetime and/or the maximum usage limitation has be
QuickSpecs HP ProLiant DL160 Gen8 Pre-configured Models NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section. NOTE: Not all models are available in all regions. Check with your local country HP offices for availability. NOTE: Pre-configured models ship with the configurations below. Options can be selected from the Core or Additional options section of this QuickSpecs.
QuickSpecs HP ProLiant DL160 Gen8 Pre-configured Models Form Factor Warranty 1U Server Warranty includes 3 year Next Day Parts replacement, 0-Years Labor, 0-Years Onsite support (3-1-1 warranty in APJ) Energy Star- Performance Model HP ProLiant DL160 Gen8 Processor(s) E5-2640 2.
QuickSpecs HP ProLiant DL160 Gen8 Configuration Information - Factory Integrated Models NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on configurable product offerings and requirements. NOTE: Configure-to-order (CTO) servers must start with a CTO Chassis.
QuickSpecs HP ProLiant DL160 Gen8 Configuration Information - Factory Integrated Models Step 2: Choose Required Options (only one of the following from each list unless otherwise noted) HP Processors NOTE: If 2 processors are desired, select one xxxxxx-L21 and one xxxxxx-B21. Eight-Core Processors HP DL160 Gen8 Intel® Xeon® E5-2680 (2.70GHz/8-core/20MB/130W) FIO Processor Kit HP DL160 Gen8 Intel® Xeon® E5-2670 (2.60GHz/8-core/20MB/115W) FIO Processor Kit HP DL160 Gen8 Intel® Xeon® E5-2665 (2.
QuickSpecs HP ProLiant DL160 Gen8 Configuration Information - Factory Integrated Models HP Memory NOTE: HP memory from previous generation servers are not qualified or warranted with this HP ProLiant Server. HP SmartMemory is required to realize the memory performance improvements and enhanced functionality listed in this document for Gen8. For additional information, please see the HP SmartMemory QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/14225_div/14225_div.
QuickSpecs HP ProLiant DL160 Gen8 Configuration Information - Factory Integrated Models HP Power Supplies HP Storage Controllers NOTE: Prior to making a power supply selection it is highly recommended that the HP Power Advisor is run to determine the right size power supply for your server configuration. The HP Power Advisor is located at: www.hp.com/go/hppoweradvisor.
QuickSpecs HP ProLiant DL160 Gen8 Configuration Information - Factory Integrated Models Step 3: Choose Additional Factory Integratable Options HP Insight Software HP Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle Single Server FIO License HP Insight Control for Linux including 1yr 24x7 Support ML/DL Bundle 1 Server FIO License HP USB and SD Options HP Internal USB Gen8 FIO Kit NOTE: Required to enable the internal USB port.
QuickSpecs HP ProLiant DL160 Gen8 Core Options NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information. HP VGA Power Cable DL160Gen8 Kit 662965-B21 HP Unique Options NOTE: Required with NVIDIA Quadro 4000 graphic card. HP DL360Gen8 Front Video Adapter Kit 655915-B21 NOTE: Required to enable the front video port.
QuickSpecs HP ProLiant DL160 Gen8 Core Options HP Memory NOTE: HP memory from previous generation servers are not qualified or warranted with this HP ProLiant Server. HP SmartMemory is required to realize the memory performance improvements and enhanced functionality listed in this document for Gen8. For additional information, please see the HP SmartMemory QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/14225_div/14225_div.html.
QuickSpecs HP ProLiant DL160 Gen8 Core Options HP Optical Drives HP 9.5mm SATA DVD ROM JackBlack Optical Drive HP 9.5mm SATA DVD RW JackBlack Optical Drive HP Hard Drives NOTE: HP ProLiant Gen8 Smart Storage solutions are equipped with entirely redesigned Small Form Factor (SFF 2.5 in) and Large Form Factor (LFF 3.5 in) hot plug carriers for HP Qualified Hard Drives and Solid State Drives. These new carriers provide status and activity indicators as well as caution indicators for "Do Not Remove".
QuickSpecs HP ProLiant DL160 Gen8 Core Options NOTE: Please see QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13021_div/13021_div.html (Worldwide) 6G SAS SLC Hot Plug SFF (2.5-inch) Enterprise Performance Solid State Drives HP 400GB 6G SAS SLC SFF (2.5-inch) SC Enterprise Performance 3yr Warranty Solid State Drive HP 200GB 6G SAS SLC SFF (2.5-inch) SC Enterprise Performance 3yr Warranty Solid State Drive 6G SAS MLC Hot Plug SFF (2.
QuickSpecs HP ProLiant DL160 Gen8 Core Options HP Networking Gigabit Ethernet Adapters HP NC112T PCI Express Gigabit Server Adapter HP NC365T 4-port Ethernet Server Adapter HP Ethernet 1Gb 4-port 331T Adapter 10 Gigabit Ethernet Adapters NOTE: No more than two10GbE I/O devices are supported in a single ProLiant server. NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.
QuickSpecs HP ProLiant DL160 Gen8 Additional Options NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information.
QuickSpecs HP ProLiant DL160 Gen8 Additional Options Includes one year of 24 x 7 HP Software Technical Support Service. NOTE: Electronic software is available in all countries except China and Japan. For China and Japan should order the physical equivalent. NOTE: For additional license kits including electronic delivery options, please see the Insight Rapid Deployment software QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12631_div/12631_div.
QuickSpecs HP ProLiant DL160 Gen8 Additional Options HP I/O Accelerator Options HP 160GB Single Level Cell PCIe ioDrive for ProLiant Servers NOTE: A low-profile PCI bracket is included for use in low-profile slots. HP 320GB Multi Level Cell PCIe ioDrive for ProLiant Servers NOTE: A low-profile PCI bracket is included for use in low-profile slots. HP 320GB Single Level Cell PCIe ioDrive Duo for ProLiant Servers HP 640GB Multi Level Cell PCIe ioDrive Duo for ProLiant Servers HP 1.
QuickSpecs HP ProLiant DL160 Gen8 Additional Options SAS Controllers HP Smart Array P421 Controller HP Smart Array P421/2GB FBWC 6Gb 2-ports Ext SAS Controller HP Smart Array P421/1GB FBWC 6Gb 2-ports Ext SAS Controller HP Smart Array P420 Controller HP Smart Array P420/2GB FBWC 6Gb 2-ports Int SAS Controller HP Smart Array P420/1GB FBWC 6Gb 2-ports Int SAS Controller NOTE: HP Smart Array P420 controller can only be installed in the internal PCI-e slot. It is not supported on external PCI-e slot.
QuickSpecs HP ProLiant DL160 Gen8 Additional Options NOTE: This is a 2 x4 External Port HBA. NOTE: This is only approved for the HP P2000 G3 SAS Modular Smart and tape drives. NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18004.www1.hp.com/products/quickspecs/14222_div/14222_div.html HP Backup & Recovery Software Data Protector Express HP Data Protector Express V6.0 for 1 Server E-LTU HP Data Protector Express V6.
QuickSpecs HP ProLiant DL160 Gen8 Additional Options HP Disk Backup HP Storage Options NOTE: For the complete range of D2D Backup Systems see: http://www.hp.com/go/d2d. For the complete range of RDX drives and media see: http://www.hp.com/go/rdx. For hardware and software compatibility of HP disk backup products see: http://www.hp.com/storage/SPOCK HP D2D Backup Systems with Backup Data Deduplication HP D2D2502i Backup System NOTE: 1.5TB of usable network disk backup capacity.
QuickSpecs HP ProLiant DL160 Gen8 Additional Options HP Disk Storage Systems HP D2000 Disk Enclosures HP D2600 Disk Enclosure HP D2700 Disk Enclosure NOTE: Please see the QuickSpecs for additional options and configuration information at: http://h18000.www1.hp.com/products/quickspecs/13404_div/13404_div.
QuickSpecs HP ProLiant DL160 Gen8 Additional Options NOTE: Please see the UPS and PDU cable matrix's on the HP Power Protection and Management page. Under Power Cords, click on the "HP Power Cord Matrix" link. That link will list cable descriptions, requirements, and specifications for UPS and PDU units. Please see the following link: www.hp.com/products/powercords. HP Power Distribution Units HP Monitored Power Distribution Unit: Full Rack Version HP 17.
QuickSpecs HP ProLiant DL160 Gen8 Additional Options NOTE: Please see the UPS and PDU cable matrix's on the HP Power Protection and Management page. Under Power Cords, click on the "HP Power Cord Matrix" link. That link will list cable descriptions, requirements, and specifications for UPS and PDU units. Please see the following link: www.hp.com/products/powercords. NOTE: This PDU has a detachable input power cord and allows for adaptability to country specific power requirements.
QuickSpecs HP ProLiant DL160 Gen8 Additional Options HP Rack Series HP Rack Options Rack Intelligent Series rack HP 642 Intelligent Series rack 1075mm pallet rack HP 642 Intelligent Series rack 1075mm shock rack Rack 10000 G2 Series rack HP 10642G2 1200mm Pallet Rack HP 10642 G2 1200mm deep Shock Rack HP 10647 G2 1200mm deep Shock Rack NOTE: It is mandatory to use a shock pallet when shipping racks with equipment installed. NOTE: Please see the QuickSpecs for additional information: http://h18000.www1.
QuickSpecs HP ProLiant DL160 Gen8 Additional Options HP USB BFR with PVC Free CN Keyboard/Mouse Kit HP USB BFR with PVC Free AE Keyboard/Mouse Kit HP USB BFR with PVC Free RU Keyboard/Mouse Kit HP USB BFR with PVC Free IN Keyboard/Mouse Kit HP USB BFR with PVC Free AP-Intl Keyboard/Mouse Kit HP USB BFR with PVC Free Intl Keyboard/Mouse Kit HP USB BFR with PVC Free PT Keyboard/Mouse Kit HP USB BFR with PVC Free TR Keyboard/Mouse Kit HP USB BFR with PVC Free CZ Keyboard/Mouse Kit HP USB BFR with PVC Free FI
QuickSpecs HP ProLiant DL160 Gen8 Additional Options HP USB and SD Options HP 2GB USB Flash Media Drive Key Kit NOTE: HP qualified blank USB key for use with HP ProLiant servers that support the VMware virtualization environment and other HP value-add software like SmartStart. HP recommends this industry standard USB flash device for use with VMware ESXi. USB device must be installed in the internal slot of the ProLiant server for use with VMware ESXi.
QuickSpecs HP ProLiant DL160 Gen8 Memory HP SmartMemory New HP SmartMemory now provides additional protection for your servers. With HP Authentication it can verify that you have true HP Qualified Memory in your HP ProLiant Gen8 server. With HP SmartMemory your new HP ProLiant server can take advantage of additional Gen8 enhancements in performance, durability and future manageability support through HP Active Health System.
QuickSpecs HP ProLiant DL160 Gen8 Memory DIMM slot/capacity/populated speed table DIMM Type Registered DIMMS (RDIMMs) DIMM Rank DIMM Capacity DIMM Native Speed (MHz) Single Rank (1R) 4GB 4GB 1333 1600 LV Std SLOTS THAT CAN BE POPULATEDLV 24 slot servers 24 24 8GB 1600 Std Dual Rank (2R) 8GB 16GB 1333 1333 LV LV Unbuffered with ECC DIMMs (UDIMMs) Single Rank (1R) Dual Rank (2R) 2GB 4GB 8GB 1333 1333 1333 LV LV LV 24 24 24 16 16 16 96 192 192 384 32 64 128 1600 1600 1066 1600 1600 1066
QuickSpecs HP ProLiant DL160 Gen8 Memory Standard memory configuration (1 CPU model) 8GB, consisting of four (4) 2GB dual-rank PC3-10600 UDIMMs Chnl 1 slot # 1 2 3 CPU1 population order A; empty E; empty I; 2GB DIMM slot # 1 2 3 CPU2 population order C; empty G; empty K; empty Chnl 1 Chnl 2 4 5 6 B; empty F; empty J; 2GB DIMM 4 5 6 D; empty H; empty L; empty Chnl 2 Chnl 3 7 8 9 L; empty H; empty D; 2GB DIMM 7 8 9 J; empty F; empty B; empty Chnl 3 Chnl 4 10 11 12 K; empty G; empty C; 2
QuickSpecs HP ProLiant DL160 Gen8 Memory Standard memory replaced with optional memory (1 CPU model) RDIMM maximum configuration 192GB, consisting of twelve (12) 16GB quad-rank PC3L-10600 RDIMMs Chnl 1 slot # 1 2 3 CPU1 population order A; 16GB DIMM E; 16GB DIMM I; 16GB DIMM slot # 1 2 3 CPU2 population order C; empty G; empty K; empty Chnl 1 Chnl 2 4 5 6 B: 16GB DIMM F; 16GB DIMM J; 16GB DIMM 4 5 6 D; empty H; empty L; empty Chnl 2 Chnl 3 7 8 9 L; 16GB DIMM H; 16GB DIMM D; 16GB DIMM 7 8 9
QuickSpecs HP ProLiant DL160 Gen8 Memory Standard memory replaced with optional memory (2 CPU model) RDIMM maximum configuration 384GB, consisting of twenty-four (24) 16GB dual-rank PC3-10600 RDIMMs DDR3 Registered (RDIMM) memory, operating at 1333MHz or 1066MHz when populated at 3 DIMMs per Channel in 24 slots.
QuickSpecs HP ProLiant DL160 Gen8 Memory 1GB = 1024MB 2GB = 2048MB 4GB = 4096MB 8GB = 8192MB 16 GB=16384MB DDR3 memory options part number decoder Following are memory options available from HP: NOTE: HP memory from previous generation servers are not qualified or warranted HP Memory with this HP ProLiant Server. HP SmartMemory is required to realize the memory performance improvements and enhanced functionality listed in this document for Gen8.
QuickSpecs HP ProLiant DL160 Gen8 Memory HP 4GB (1x4GB) Dual Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9 Low Voltage Memory Kit HP 2GB (1x2GB) Single Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9 Low Voltage Memory Kit NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator. NOTE: Kits described as LP include Low Power DIMMs.
QuickSpecs HP ProLiant DL160 Gen8 Storage 1-4 A 1-8 A Four LFF Hot-plug SAS/SATA hard drive bays Optional DVD-ROM, or DVD RW Eight SFF Hot-plug SATA/SAS hard drive bays Optional DVD-ROM, or DVD RW Drive Support Removable Media DVD-ROM DVD RW Quantity Supported Position Supported Up to 1 Up to 1 A A Controller Integrated IDE (ATAPI) (optional) Integrated IDE (ATAPI) (optional) Hard Drives NOTE: Embedded SATA controller supports up to 3Gb/s speed in HP ProLiant DL160 Gen8.
QuickSpecs HP ProLiant DL160 Gen8 Storage SAS Hot Plug Smart Drive SFF (2.5-inch) Enterprise Drives Quantity Position Supported Supported 900GB 6G SAS 10K Up to 8 1-8 600GB 6G SAS 10K 450GB 6G SAS 10K 300GB 6G SAS 15K 300GB 6G SAS 10K 146GB 6G SAS 15K 72GB 6G SAS 15K SAS Hot Plug Smart Drive SFF (2.5-inch) Midline Drives Quantity Position Supported Supported 1TB 6G SATA 7.2K Up to 8 1-8 500GB 6G SATA 7.
QuickSpecs HP ProLiant DL160 Gen8 Storage 800GB 6G SAS MLC SSD SFF 400GB 6G SAS MLC SSD SFF 200GB 6G SAS MLC SSD SFF Up to 8 1-8 HP Smart Array P420/ 1G FBWC controller 3G SATA MLC Hot Plug SFF (2.
QuickSpecs HP ProLiant DL160 Gen8 Storage HP USB Tape Drives DAT 72 DAT 160 1U USB Rack-Mount Kit External USB 2.
QuickSpecs HP ProLiant DL160 Gen8 Storage HP D2D Backup Systems, iSCSI D2D2500i D2D4000i Rack Mount Embedded Network Controller. If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is recommended. HP D2D Backup Systems, Fibre Channel D2D4000fc Rack Mount Direct server attach is not supported, requires connection via SAN fabric. See: http://www.hp.
QuickSpecs HP ProLiant DL160 Gen8 Technical Specifications System Unit Dimensions (H x W x D) (with bezel) 4 LFF 8 SFF Weight (approximate) Input Requirements (per power supply) BTU Rating Power Specifications Maximum (all hard drives, power supplies, and processors installed) Minimum (one hard drive, power supply, and processor installed) Rated Line Voltage Rated Input Current 1.7" (43.2mm) Height x 17.1" (434.6mm) Width x 29.5" (750mm) Length 1.7" (43.2mm) Height x 17.1" (434.6mm) Width x 27.
QuickSpecs HP ProLiant DL160 Gen8 Technical Specifications Relative Humidity (non-condensing) Altitude Acoustic Noise Emissions Classification (EMC) HP iLO 4 On System Architecture DA - 14282 10°C/hr (18°F/hr). The upper limit may be limited by the type and number of options installed. System performance may be reduced if operating with a fan fault or above 30°C (86°F). Non-operating -30° to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr).
QuickSpecs HP ProLiant DL160 Gen8 Technical Specifications Management Processor Processor Upgradeability Video Support Interfaces PCI Express RISC processor core running at 400MHz Option firmware upgradeable via Flash ROM 1920 x 1200 (16 bpp) DVR max resolution One Ethernet Sideband connection (10/100/1000 Mb/s) One Ethernet network LAN connection (1 Gbps) for rack, towers and SL systems One Ethernet network LAN connection (10/100 Mb/s) for Blade Systems Memory 16 MB Flash 256 MB DDR 3 with ECC (112 MB
QuickSpecs HP ProLiant DL160 Gen8 Technical Specifications HP Ethernet 1Gb 2-port 361i Adapter Management protocols supported SNMP, IPMI 2.0 (system and LAN interface), DMTF Systems Management Architecture for Server Hardware Command Line Protocol (SMASH CLP), HP RIBCL XML Network Interface Capability 10Base-T/100Base-TX/1000Base-TX IEEE 802.3 10Base-T IEEE 802.3ab 1000Base-T IEEE 802.3u 100Base-TX IEEE 1588, IEEE 802.1AS PCI Express v 2.1, 5.0 GT/s and 2.
QuickSpecs HP ProLiant DL160 Gen8 Technical Specifications Environment-friendly Products and Approach End-of-life Management and Recycling Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: http://www.hp.com/go/green. To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office.
