Data Sheet

QuickSpecs
Aruba 2530 Switch Series
Technical Specifications
Page 38
Services
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services
for details on the service-
level descriptions and product
numbers. For details about services and response times in your area, please contact your local Hewlett
Packard Enterprise sales office.
HPE X112 100M SFP LC BX-U Transceiver (J9100B)
A small form-factor pluggable (SFP) 100-Megabit BX (bi-directional) "upstream" transceiver that provides 100 Mbps full-duplex
connectivity up to 10 km on one strand of singlemode fiber. The J9100B connects to the J9099B "downstream" transceiver, or to
any IEEE-standard 100BASE-BX10-D ("downstream") device.
Ports
1 LC 100BASE-BX10 port (IEEE 802.3ah Type 100BASE-BX10-U); Duplex: full only
Physical characteristics
Dimensions
2.7(d) x 0.55(w) x 0.48(h) in. (6.86 x 1.39 x 1.22 cm)
Weight
0.07 lb. (.03 kg)
Environment
Operating temperature
32ºF to 158ºF (0ºC to 70ºC)
Operating relative
humidity
0% to 95%, noncondensing
Non-operating/Storage
temperature
-40ºF to 185ºF (-40ºC to 85ºC)
Cabling
Type:
Single
-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
• 0.5-10,000 m (single-mode fiber)
NOTES:
For supported platforms and minimum software requirements to support this product, see the
document titled "Support for the HPE BX Transceivers" on the "HPE Mini
-
GBICs and SFPs" Manuals
Web page.
The J9100B connects to the J9099B "downstream" transceiver, or to any IEEE
-standard 100BASE-
BX10
- D ("downstream") device. (A 100-BX-U transceiver can only connect to a 100-BX-
D product.
You cannot connect two 100
-BX-U transceivers together.)
Transmit wave
length: 1310 nm. Receive wavelength: 1550 nm.
Power consumption is 1.1 watts maximum.
Services
Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services
for details on the service-
level descriptions and product
numbers. For details about services and response times in your area, please contact your local Hewlett
Packard Enterprise sales office.
HPE X121 1G SFP LC SX Transceiver (J4858C)
A small form-factor pluggable (SFP) Gigabit SX transceiver that provides a full-duplex Gigabit solution up to 550 m on multimode
fiber.
Ports
1 LC 1000BASE-SX port; Duplex: full only
Physical characteristics
Dimensions: 2.24(d) x 0.54(w) x 0.48(h) in. (5.69 x 1.37 x 1.22 cm)
Weight:
0.04 lb. (0.02 kg)
Transceiver form factor: SFP
Environment
Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 85%, noncondensing
Non-operating/Storage temperature: -40°F to 203°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)
Electrical characteristics
Power consumption typical: 0.4 W
Power consumption maximum: 0.7 W