Datasheet

ManualsBrandsHewlett Packard Enterprise ManualsNetworkingJG932A

QuickSpecs

HP 5130 EI Switch Series

Overview

c04394228 — DA – 15058 Worldwide — Version 1 —September 29, 2014

Page 1

HP 5130 EI Switch Series

HP 5130-24G-4SFP+ EI Switch

HP 5130-24G-SFP-4SFP+ EI Switch

HP 5130-48G-4SFP+ EI Switch

Summary of content (28 pages)

PAGE 1
QuickSpecs HP 5130 EI Switch Series Overview HP 5130 EI Switch Series HP 5130-24G-4SFP+ EI Switch HP 5130-24G-SFP-4SFP+ EI Switch HP 5130-48G-4SFP+ EI Switch c04394228 — DA – 15058 Worldwide — Version 1 —September 29, 2014 Page 1
PAGE 2
QuickSpecs HP 5130 EI Switch Series Overview HP 5130-24G-PoE+-4SFP+ (370W) EI Switch HP 5130-48G-PoE+-4SFP+ (370W) EI Switch Models HP 5130-24G-4SFP+ EI Switch HP 5130-24G-SFP-4SFP+ EI Switch HP 5130-48G-4SFP+ EI Switch HP 5130-24G-PoE+-4SFP+ (370W) EI Switch HP 5130-48G-PoE+-4SFP+ (370W) EI Switch JG932A JG933A JG934A JG936A JG937A Key features      Fixed 10G Ports for high speed Stacking or Uplinks Support for multiple services Comprehensive security control policies Diversified quality of se
PAGE 3
QuickSpecs HP 5130 EI Switch Series Overview access and can be used at the edge of a network or to connect server clusters in data centers. High availability, simplified management, and comprehensive security control policies are among the key features that distinguish this series.
PAGE 4
QuickSpecs HP 5130 EI Switch Series Overview   monitors a cable between two switches and shuts down the ports on both ends if the cable is broken, which prevents network problems such as loops IPv6 management provides future-proof networking because the switch is capable of being managed whether the attached network is running IPv4 or IPv6; supports pingv6, tracertv6, Telnetv6, TFTPv6, DNSv6, syslogv6, FTPv6, SNMPv6, DHCPv6, and RADIUS for IPv6 Troubleshooting ingress and egress port monitoring enabl
PAGE 5
QuickSpecs HP 5130 EI Switch Series Overview  Intelligent Resilient Framework (IRF) creates virtual resilient switching fabrics, where two or more switches perform as a single L2 switch and L3 router; switches do not have to be co-located and can be part of a disaster-recovery system; servers or switches can be attached using standard LACP for automatic load balancing and high availability; can eliminate the need for complex protocols like Spanning Tree Protocol, Equal-Cost Multipath (ECMP), or VRRP, th
PAGE 6
QuickSpecs HP 5130 EI Switch Series Overview                 industry-standard method of user authentication using an IEEE 802.
PAGE 7
QuickSpecs HP 5130 EI Switch Series Overview prevents flooding of IP multicast traffic Device support  Cisco prestandard PoE support detects and provides power to Cisco's prestandard PoE devices such as wireless LAN access points and IP phones Additional information   Green IT and power improves energy efficiency through the use of the latest advances in silicon development; shuts off unused ports and utilizes variable-speed fans, reducing energy costs Green initiative support provides support for
PAGE 8
QuickSpecs HP 5130 EI Switch Series Configuration Build To Order: BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-Shippable solution.
PAGE 9
QuickSpecs HP 5130 EI Switch Series Configuration    min=0 \ max=4 SFP+ Transceivers Power supply included 1U - Height Note:2, 4, 5 PDU Cable NA/MEX/TW/JP  C15 PDU Jumper Cord (NA/MEX/TW/JP) JG936A#B2B PDU Cable ROW  C15 PDU Jumper Cord (ROW) JG936A#B2C High Volt Switch to Wall Power Cord  NEMA L6-20P Cord (NA/MEX/JP/TW) JG936A#B2E HP 5130-48G-PoE+-4SFP+ EI Swch  48 RJ-45 autosensing 10/100/1000 ports  4 SFP+ ports  min=0 \ max=4 SFP+ Transceivers  Power supply included  1U - Height J
PAGE 10
QuickSpecs HP 5130 EI Switch Series Configuration HP X120 1G SFP RJ45 T Transceiver HP X120 1G SFP LC BX 10-U Transceiver HP X120 1G SFP LC BX 10-D Transceiver HP X120 1G SFP LC LH40 1550nm Transceiver HP X125 1G SFP LC LH40 1310nm Transceiver HP X125 1G SFP LC LH70 Transceiver HP X120 1G SFP LC LH100 Transceiver HP X130 10G SFP+ LC SR Transceiver HP X130 10G SFP+ LC LR Transceiver HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable HP X240 10G SFP+ to SFP+ 1.
PAGE 11
QuickSpecs HP 5130 EI Switch Series Configuration High Volt Switch to Wall Power Cord  NEMA L6-20P Cord (NA/MEX/JP/TW) JG932A#B2E HP 5130-24G-SFP-4SFP+ EI Switch  24 SFP ports  (Of the 24, 8 are dual-personality ports - autosensing 10/100/1000BASE-T or SFP)  min=0 \ max=24 SFP Transceivers  4 SFP+ ports  min=0 \ max=4 SFP+ Transceivers  Must select min 1 power supply  1U - Height JG933A See Configuration Note:1, 2, 6, 7 HP 5130-48G-4SFP+ EI Switch  48 RJ-45 autosensing 10/100/1000 ports  4 S
PAGE 12
QuickSpecs HP 5130 EI Switch Series Configuration  NEMA L6-20P Cord (NA/MEX/JP/TW) Configuration Rules: Note 1 The following Transceivers install into this Switch: (SFP Ports) (Use #0D1 quoted to switch if switch is CTO) - if applicable HP X115 100M SFP LC FX Transceiver HP X110 100M SFP LC LX Transceiver HP X110 100M SFP LC LH40 Transceiver HP X110 100M SFP LC LH80 Transceiver HP X115 100M SFP LC BX 10-U Transceiver HP X115 100M SFP LC BX 10-D Transceiver HP X120 1G SFP LC SX Transceiver HP X120 1G SF
PAGE 13
QuickSpecs HP 5130 EI Switch Series Configuration PDU Cable NA/MEX/TW/JP  C15 PDU Jumper Cord (NA/MEX/TW/JP) JG932A#B2B PDU Cable ROW  C15 PDU Jumper Cord (ROW) JG932A#B2C High Volt Switch to Wall Power Cord  NEMA L6-20P Cord (NA/MEX/JP/TW) JG932A#B2E HP 5130-24G-SFP-4SFP+ EI Switch  24 SFP ports  (Of the 24, 8 are dual-personality ports - autosensing 10/100/1000BASE-T or SFP)  min=0 \ max=24 SFP Transceivers  4 SFP+ ports  min=0 \ max=4 SFP+ Transceivers  Must select min 1 power supply  1
PAGE 14
QuickSpecs HP 5130 EI Switch Series Configuration HP 5130-48G-PoE+-4SFP+ EI Swch  48 RJ-45 autosensing 10/100/1000 ports  4 SFP+ ports  min=0 \ max=4 SFP+ Transceivers  Power supply included  1U - Height JG937A See Configuration Note:2, 4, 7 PDU Cable NA/MEX/TW/JP  C15 PDU Jumper Cord (NA/MEX/TW/JP) JG937A#B2B PDU Cable ROW  C15 PDU Jumper Cord (ROW) JG937A#B2C Configuration Rules: Note 1 The following Transceivers install into this Switch: (SFP Ports) (Use #0D1 quoted to switch if switch is
PAGE 15
QuickSpecs HP 5130 EI Switch Series Configuration Note 4 Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord) . (See Localization Menu) REMARK: When Switches/Routers are Factory Racked, Then #B2B, or #B2C should be the Defaulted Power Cable option on the Switches/Routers. Note 7 If HP CTO Switch Chassis is selected for Rack Level Integration, Then the Switch needs to integrate (with #0D1) to the Rack.
PAGE 16
QuickSpecs HP 5130 EI Switch Series Configuration HP 2 m Multimode OM3 LC/LC FC Cable HP 5 m Multimode OM3 LC/LC FC Cable HP 15 m Multimode OM3 LC/LC FC Cable HP 30 m Multimode OM3 LC/LC FC Cable HP 50 m Multimode OM3 LC/LC FC Cable HP Premier Flex LC/LC OM4 2f 1m Cbl HP Premier Flex LC/LC OM4 2f 2m Cbl HP Premier Flex LC/LC OM4 2f 5m Cbl HP Premier Flex LC/LC OM4 2f 15m Cbl HP Premier Flex LC/LC OM4 2f 30m Cbl HP Premier Flex LC/LC OM4 2f 50m Cbl AJ835A AJ836A AJ837A AJ838A AJ839A QK732A QK733A QK734A Q
PAGE 17
QuickSpecs HP 5130 EI Switch Series Configuration Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and Box Level CTO) High Volt Switch/Router/Power Supply to Wall Power Cord - #B2E Option.
PAGE 18
QuickSpecs HP 5130 EI Switch Series Configuration HP RPS 1000/1600 A JD5 Non-PoE 2m Cable JD188A See Configuration Note:3 Configuration Rules: Note 1 Supported on JG934A and JD366A when used in JG933A or JG943A, to connect to JD183A. Note 2 Supported on JG936A, JG937A to connect to JG136A. Note 3 Supported on JG934A, JG933A, to connect to JG136A.
PAGE 19
QuickSpecs HP 5130 EI Switch Series Technical Specifications HP 5130-24G-4SFP+ EI Switch (JG932A) I/O ports and slots 24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 4 SFP+ fixed 1000/10000 SFP+ ports Additional ports and 1 RJ-45 serial console port slots Physical characteristics Dimensions 17.32(w) x 6.3(d) x 1.72(h) in (44 x 16 x 4.36 cm) (1U height) Weight 11.
PAGE 20
QuickSpecs HP 5130 EI Switch Series Technical Specifications Immunity Management Services Generic EN 55024 ESD EN300 386 IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
PAGE 21
QuickSpecs HP 5130 EI Switch Series Technical Specifications Safety Emissions Immunity Management Services with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. Power Ratings for AC Power Suppply indicated above. For DC input power, Idle Power is 38W and Max is 68W. DC Max input current is 8A. Units are supplied without a power supply. Customer must buy 1 or 2 JD362A(AC) or JD366A (DC) power supply.
PAGE 22
QuickSpecs HP 5130 EI Switch Series Technical Specifications dissipation AC voltage DC voltage Current Maximum power rating Idle power Notes Safety Emissions Immunity Management Services powered units heat dissipation is 130BTU/hr min, 171 BTU/hr max 100 - 240 VAC -48 to -60 VDC 10 A 45 W 38 W Idle power is the actual power consumption of the device with no ports connected.
PAGE 23
QuickSpecs HP 5130 EI Switch Series Technical Specifications Operating relative humidity Nonoperating/Storage temperature Nonoperating/Storage relative humidity Acoustic Electrical characteristics Frequency Maximum heat dissipation AC voltage Current Maximum power rating Idle power PoE power Notes Safety Emissions Immunity Management Services 10% to 90%, noncondensing -40°F to 158°F (-40°C to 70°C) 5% to 95%, noncondensing Low-speed fan: 49.8 dB, High-speed fan: 52.
PAGE 24
QuickSpecs HP 5130 EI Switch Series Technical Specifications Mounting and enclosure Performance Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included) 1000 Mb Latency < 5 µs 10 Gbps Latency < 1.5 µs Throughput 130.9 Mpps Routing/Switching 176 Gbps capacity Routing table size 512 entries (IPv4), 256 entries (IPv6) MAC address table size 16384 entries Reliability MTBF (years) 37.
PAGE 25
QuickSpecs HP 5130 EI Switch Series Technical Specifications descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
PAGE 26
QuickSpecs HP 5130 EI Switch Series Technical Specifications RFC 2668 Definitions of Managed Objects for IEEE 802.
PAGE 27
QuickSpecs HP 5130 EI Switch Series Accessories HP FlexFabric 5700 Switch Series accessories Transceivers HP X110 100M SFP LC LH40 Transceiver HP X110 100M SFP LC LH80 Transceiver HP X115 100M SFP LC FX Transceiver HP X110 100M SFP LC LX Transceiver HP X115 100M SFP LC BX 10-U Transceiver HP X115 100M SFP LC BX 10-D Transceiver HP X125 1G SFP LC LH40 1310nm Transceiver HP X120 1G SFP LC LH40 1550nm Transceiver HP X125 1G SFP LC LH70 Transceiver HP X120 1G SFP LC LH100 Transceiver HP X120 1G SFP LC SX Tra
PAGE 28
QuickSpecs HP 5130 EI Switch Series Accessories HP X290 1000 A JD5 Non-PoE 2m RPS Cable JD188A HP 5130-24G-PoE+-4SFP+ (370W) EI Switch (JG936A) HP RPS1600 Redundant Power System HP RPS1600 1600W AC Power Supply JG136A JG137A HP X290 1000 A JD5 2m RPS Cable JD187A HP 5130-48G-PoE+-4SFP+ (370W) EI Switch (JG937A) HP RPS1600 Redundant Power System HP RPS1600 1600W AC Power Supply HP X290 1000 A JD5 2m RPS Cable JG136A JG137A JD187A To learn more, visit: www.hp.