Datasheet
QuickSpecs
HP 5130 EI Switch Series
Configuration
c04394228 — DA – 15058 Worldwide — Version 1 —September 29, 2014
Page 12
NEMA L6-20P Cord (NA/MEX/JP/TW)
Configuration Rules:
Note 1
The following Transceivers install into this Switch: (SFP Ports) (Use #0D1 quoted to switch if switch is
CTO) - if applicable
HP X115 100M SFP LC FX Transceiver
JD102B
HP X110 100M SFP LC LX Transceiver
JD120B
HP X110 100M SFP LC LH40 Transceiver
JD090A
HP X110 100M SFP LC LH80 Transceiver
JD091A
HP X115 100M SFP LC BX 10-U Transceiver
JD100A
HP X115 100M SFP LC BX 10-D Transceiver
JD101A
HP X120 1G SFP LC SX Transceiver
JD118B
HP X120 1G SFP LC LX Transceiver
JD119B
HP X120 1G SFP RJ45 T Transceiver
JD089B
HP X120 1G SFP LC BX 10-U Transceiver
JD098B
HP X120 1G SFP LC BX 10-D Transceiver
JD099B
HP X120 1G SFP LC LH40 1550nm Transceiver
JD062A
HP X125 1G SFP LC LH40 1310nm Transceiver
JD061A
HP X125 1G SFP LC LH70 Transceiver
JD063B
HP X120 1G SFP LC LH100 Transceiver
JD103A
Note 4
Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord) or #B2E. (See
Localization Menu)
Note 5
#B2E is Offered only in NA, Mexico, Taiwan and Japan.
Note 6
If this Switch is selected, Then a Minimum of 1 factory integrated accessory must be ordered and
integrated to CTO chassis. See Menu below, option must have a #0D1 to be integrated to the CTO
Chassis.
Note 7
If the Switch Chassis is to be Box Level Factory Integrated (CTO), Then the #0D1 is required on the Switch
Chassis and integrated to the JG706A - HP 51xx CTO Enablement. (Min 1/Max 1 Switch per SSP)
Remarks:
Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and Japan or
#B2C ROW. (Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and Box
Level CTO)
High Volt Switch/Router/Power Supply to Wall Power Cord - #B2E Option. (Offered only in North America,
Mexico, Taiwan, and Japan)
Rack Level Integration CTO Models
Switch Chassis
HP 5130-24G-4SFP+ EI Switch
JG932A
24 RJ-45 autosensing 10/100/1000 ports
4 SFP+ ports
min=0 \ max=4 SFP+ Transceivers
Power supply included
1U - Height
See
Configuration
Note:2, 4, 7