Data Sheet

QuickSpecs
Aruba 2930F Switch Series
Configuration
Information
Page
20
Configuration Rules
Rule #
Description
SKU
1
The following Transceivers install into this Switch:
Aruba 1G SFP LC SX 500m OM2 MMF Transceiver
J4858D
Aruba 1G SFP LC LX 10km SMF Transceiver
J4859D
Aruba 1G SFP LC LH 70km SMF Transceiver
J4860D
Aruba 1G SFP RJ45 T 100m Cat5e Transceiver
J8177D
Aruba 100M SFP LC FX 2km MMF Transceiver
J9054D
2
The following Transceivers install into this Switch:
Aruba 10G SFP+ LC SR 300m OM3 MMF Transceiver
J9150D
Aruba 10G SFP+ LC LR 10km SMF Transceiver
J9151E
Aruba 10G SFP+ LC ER 40km SMF Transceiver
J9153D
Aruba 10G SFP+ to SFP+ 1m Direct Attach Copper Cable
J9281D
Aruba 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
J9283D
3
If this switch is factory installed in HPE Racks, Then the J9583A#0D1 is required.
CLIC Only - Allow the J9583AZ in all regions.
4
Localization required on orders without #B2B, #B2C, #B2E options.
5
If this Switch Chassis is selected for Rack Level Integration, Then the Switch Chassis needs to
integrate (with #0D1) to the HPE Rack.
6
TAA Switch Chassis are available in the US, UK, Israel, Vietnam, South Korea, India and Taiwan
only.
8
The following Transceivers install into this Switch:
Aruba 1G SFP LC SX 500m MMF TAA Transceiver
JL745A
Aruba 1G SFP LC LX 10km SMF TAA Transceiver
JL746A
Aruba 1G SFP RJ45 T 100m Cat5e TAA Transceiver
JL747A
9
The following Transceivers install into this Switch:
Aruba 10G SFP+ LC SR 300m MMF TAA Transceiver
JL748A
Aruba 10G SFP+ LC LR 10km SMF TAA Transceiver
JL749A
NOTE:
Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord
-
#B2B in North America, Mexico, Taiwan, and
Japan or #B2C ROW. (Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Pow
er Cord -
Localized Option (Watson Default for BTO and
Box Level CTO)
#AC3
- No Power Cord.
Enter the following menu selections as integrated to the CTO Model X server above if order is
factory built.