Data Sheet

QuickSpecs
Aruba 2930F Switch Series
Technical Specifications
Page
31
Aruba 2930F 12G PoE+ 2G/2SFP+ Switch (JL693A)
I/O ports and slots
12 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-
TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Duplex: 10BASE-T/100BASE-
TX: half or full;
1000BASE-T: full only
2 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-
T:
full only
2 SFP+ 1/10GbE ports; PHY-less
Additional ports
and slots
1 dual-personality (RJ-45 or USB micro-B) serial console port
Physical
characteristics
Dimensions
10 (w) x 10 (d) x 1.73 (h) in (25.4 x 25.4 x 4.39 cm) (1U height)
Weight
4.85 lb (2.2kg)
Memory and
processor
Dual Core ARM Cortex A9 @ 1016 MHz, 1 GB DDR3 SDRAM; Packet buffer size: 12.38 MB
4.5MB Ingress/7.785 Egress, 4 GB eMMC
Performance
1000 Mb Latency
< 3.8
µ
s (64-byte packets)
10 Gbps Latency
< 1.6 µs (64-byte packets)
Throughput
up to 41.7 Mpps
Switching capacity
68 Gbps
Routing table size
2,000 IPv4, 1,000 IPv6 in hardware, 200 OSPF, 256 Static, 10,000 RIP
MAC address table size
32768 entries
Environment
Operating temperature
32°F to 113°F (0°C to 45°C); up to 5000 Feet, - 0C to 40C (32F to 104F)
up to 10000 Feet
Operating relative humidity
15% to 95% @ 104°F (40°C), noncondensing
Non-operating/Storage
temperature
-40°F to 158°F (-40°C to 70°C); up to 15000 Feet
Non-operating/Storage
temperature
15% to 95% @ 149°F (65°C), noncondensing
Acoustic
Power: 0 dB, Pressure: 0 dB Fanless
Electrical
characteristics
Power efficiency certifications
meets DoE VI certification.
Maximum heat dissipation
68.2 BTU/hr (72.0 kJ/hr)
Voltage
90 - 264 VAC, rated
Current
1.7 A
Maximum power rating
170 W
PoE power
139 W PoE+
Frequency
50/60 Hz
NOTES:
Maximum power rating and maximum heat dissipation are the worst-
case theoretical maximum numbers
provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in,
and all modules populated.
PoE Power is the power supplied by the
internal power supply, it is dependent on the type and quantity of
power supplies and may be supplemented with the use of a External Power Supply (EPS).
Safety
UL 60950-1 2nd Edition; EN 60950-1:2006 +A11:2009 +A1:2010 +A12:2011+A2:2013; IEC 60950-1:2005
+A1:2009 +A2:2013; CSA 22.2 No. 60950-1-07 2nd; EN 60825-1:2014 / IEC 60825-1:2014 Class 1
Emissions
EN 55032:2012/CISPR 32 Class A; FCC CFR 47 Part 15 Class A; VCCI Class A; ICES-003 Class A; CNS 13438