Specification Sheet

QuickSpecs
HPE ProLiant DL360 Gen10 Server
Standard Features
Page
12
Storage Controllers
NVMe Boot Device
• HPE NS204i-p NVMe PCIe3 OS Boot Device
Software RAID
• HPE Smart Array S100i SR Gen10 SW RAID
Notes
:
−
All models come with the S100i Smart Array Controller with embedded software RAID support for up to 12 bays. The S100i
uses 14 embedded SATA ports, but only 12 are available for bays as 2 are leveraged to support the M.2 connectors on the
optional SATA M.2 capable primary riser (867978-B21).
−
HPE Smart Array S100i SR Gen10 SW RAID will operate in UEFI mode only. For legacy support an additional controller will
be needed, and for CTO orders please also select the Legacy mode settings part, 758959-B22.
−
HPE Smart Array S100i SR Gen10 SW RAID is off by default and must be enabled.
−
The S100i supports Microsoft Windows Server only.
−
For Linux users, HPE offers a solution that uses in-distro open-source software to create a two-disk RAID 1 boot volume.
For more information visit:
https://downloads.linux.hpe.com/SDR/project/lsrrb/
Essential RAID Controllers
• HPE Smart Array E208i-a SR Gen10 Controller
• HPE Smart Array E208i-a SR G10 LH Controller
• HPE Smart Array E208i-p SR Gen10 Controller
• HPE Smart Array E208e-p SR Gen10 Controller
Performance RAID
Controllers
• HPE Smart Array P408i-a SR Gen10 Controller
• HPE Smart Array P408i-a SR G10 LH Controller
• HPE Smart Array P408i-p SR Gen10 Controller
• HPE Smart Array P408e-p SR Gen10 Controller
• HPE Smart Array P816i-a SR Gen10 Controller
• HPE Smart Array P816i-a SR G10 LH Controller
Notes
:
−
If GPGPU is needed then the LH controller (low profile heatsink) should be ordered to allow GPU to fit in the chassis.
− For additional details, please see HPE Smart Array Gen10 Controllers Data Sheet.
Maximum Storage
Storage
Capacity
Configuration
Hot Plug SFF SAS HDD
26.4 TB
8+2+1 x 2.4 TB (with optional UMB + rear drive option)
Hot Plug SFF SATA HDD
22 TB
8+2+1 x 2.0 TB (with optional UMB + rear drive option)
Hot Plug SFF SAS SSD
168.3 TB
8+2+1 x 15.3 TB (with optional UMB + rear drive option)
Hot Plug SFF SATA SSD
84.48 TB
8+2+1 x 7.68 TB (with optional UMB + rear drive option)
Hot Plug SFF NVMe PCIe SSD
153.6 TB
10 x 15.36 TB NVMe
Hot Plug LFF SAS HDD
64 TB
4 x 16 TB
Hot Plug LFF SATA HDD
64 TB
4 x 16 TB
Hot Plug LFF SAS SSD
7.68 TB
4 x 1.92 TB
Hot Plug LFF SATA SSD
7.68 TB
4 x 1.92 TB