Specification Sheet

QuickSpecs
HPE ProLiant DL360 Gen10 Server
Standard Features
Page
13
Graphics
• Integrated video standard
• Video modes up to 1920 x 1200 @ 60 Hz (32 bpp)
• 16 MB Video Memory
• HPE iLO 5 on system management memory
• 32 MB Flash
• 4 Gbit DDR3 with ECC protection
Power Supply
• HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
Notes: Available in 94% efficiency.
• HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
Notes:
− Available in 94% and 96% efficiency.
− Also available in -48VDC and 227VAC/380VDC power inputs.
• HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
Notes:
− Available in 94% efficiency.
− 1600W Power supplies only support high line voltage (200 VAC to 240 VAC).
HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that
allows for hot plug, tool-less
installation into HPE ProLiant Gen10 Performance Servers. Flex Slot power supplies are certified for high
-efficiency operation and
offer multiple power output options, allowing users to "right
-size" a power supply for specific server configurations. This flexibility
helps to reduce power waste, lower overall energy costs, and avoid "trapped" power capacity in the data center.
All pre
-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This jumpe
r cord is also included with
each standard AC power supply option kit. If a different power cord is required, please check the
ProLiant Power Cables web page.
To review the power requirements for your selected system, please use the
HPE Power Advisor Tool.
For information on power specifications and technical content visit HPE Server power supplies.
Interfaces
Serial
1 port - Optional
Video
1 Front - Display port (optional 8 SFF and 4 LFF only)
1 Rear - VGA port (standard on all chassis types)
Notes: Both ports are not active simultaneously.
Network Ports
4x 1GbE embedded NIC (if equipped/depending on model)
1 FlexibleLOM slot available on all chassis types (supporting various NICs adapters)
iLO Remote Mgmt Port
1 Gb Dedicated
MicroSD Slot
1 MicroSD slot
Notes: The MicroSD slot is not hot-pluggable, server must be powered down before removal.
USB 3.0
Up to 5 total: 1 front, 2 rear, 2 internal (standard on all chassis types)
+1 optional USB 2.0 front (on 8 SFF and 4 LFF only)
SID (Systems Insight
Display)
Optional for all chassis types
Notes:
Will lose iLO Service Port if selecting this option.