Specification Sheet

ManualsBrandsHewlett Packard Enterprise ManualsAccessories & SuppliesHPE ProLiant DL360 Gen10 Rack Server with one Intel Xeon 5218R Processor, 32 GB Memory, 10Gb 2-Port 562FLR-T Adapter, 8 Small Form Factor Drive Bays and one 800W Power Supply

Table Of Contents

QuickSpecs

HPE ProLiant DL360 Gen10 Server

Standard Features

Page

•

IPMI 2.0

• Secure Digital 4.0

• TPM 1.2 and 2.0 support

• Advanced Encryption Standard (AES)

• Triple Data Encryption Standard (3DES)

• SNMP v3

• TLS 1.2

• DMTF Systems Management Architecture for Server Hardware Command Line (SMASH CLP)

• Active Directory v1.0

• ASHRAE A3/A4

• Energy Star

• European Union (EU) eco-design regulations for server and storage products, known as Lot 9, go into effect on March 1st,

2020. Among other requirements, for servers this directive establishes power thresholds for idle state, as well as efficiency

and performance in active state which vary among configurations. HPE ProLiant Gen10 servers are compliant with Lot 9

requirements. For more information regarding HPE Lot 9 conformance, please visit:

https://www.hpe.com/us/en/about/environment/msds-specs-more/erp-lot9-servers.html

Notes

: For additional technical thermal details regarding ambient temperatures, humidity and features support please

visit:

http://www.hpe.com/servers/ashrae.

HPE Server UEFI/Legacy ROM

UEFI enables numerous new capabilities specific to HPE ProLiant servers such as:

• Secure Boot and Secure Start enable for enhanced security

• Operating system specific functionality

• Support for > 2.2 TB (using GPT) boot drives

• USB 3.0 Stack

• Embedded UEFI Shell

• Mass Configuration Deployment Tool using iLO RESTful API that is Redfish API Conformant

• PXE boot support for IPv6 networks

• Workload Profiles for simple performance optimization

UEFI Boot Mode only:

• TPM 2.0 Support

• NVMe Boot Support

• Platform Trust Technology (PTT) can be enabled.

• iSCSI Software Initiator Support.

• HTTP/HTTPs Boot support as a PXE alternative.

• Boot support for option cards that only support a UEFI option ROM

Notes

−

For UEFI Boot Mode, boot environment and OS image installations should be configured properly to support UEFI.

−

UEFI FIO Setting (758959-B22) can be selected to configure the system in Legacy mode in the factory for your HPE

ProLiant Gen10 Server.