Specification Sheet

QuickSpecs
HPE ProLiant DL360 Gen10 Server
Overview
Page
3
Internal View - Standard for all DL360 Gen10
1.
For 8 SFF or 4 LFF - Standard single rotor hot plug fans
1
1 CPU – 5 standard fans
2 CPUs – 7 standard fans
Option: High Performance fans
13.
Primary (CPU1) PCIe 3.0 riser (Standard: GPU power
connector + 1x 16 and 1x 8)
Option: 2 SATA M.2 + 2x 16
Option: (8 SFF only): 2x 4 NVMe + 1x 16 and 1x 8
2.
Option: HPE Smart Hybrid Capacitor or HPE Smart Storage
Battery
14.
Option: Front Display port / USB 2.0
3.
Up to 2 processors (shown with standard heat sinks)
15.
FlexibleLOM (supports various NICs up to 25GbE)
4.
MicroSD card slot
16.
x4 SATA port 1
5.
Option: Chassis Intrusion Detection
17.
x4 SATA port 2
6.
Hard Drive backplane power connector
18.
x2 SATA port 3
7.
Dual internal USB 3.0 connector
19.
x1 SATA port 4
8.
Smart Array Controller (Type -a shown)
20.
Front Power USB 3.0 connector
9.
Up to 2 Power Supplies for redundant power
21.
Optical/SATA port 5
10.
Secondary (CPU2) PCIe 3.0 riser
Option: Full Height x16 (Lose slot 2 on Primary riser)
10
22.
DDR4 DIMM slots (Fully populated 24 DIMMs shown)
11.
System Battery
12.
Optional: TPM 2.0
Notes:
−
1
For 10 NVMe chassis - 7 High Performance fans
−
10
For 10 NVMe chassis – Secondary Riser is not available due to 10 x4 NVMe riser for PCIe direct attached