User Manual

HP Smart app | 62
Connect using the HP Smart app
You can use the HP Smart app to set up the printer on your wireless network. The HP Smart app
is supported on iOS, Android, and Windows devices.
1 Make sure your computer or mobile device is connected to your wireless network and you
know the password of your wireless network.
2 Check if the printer is in the Auto Wireless Connect (AWC) setup mode.
If this is the first time you set up the printer, the printer is ready for setup after the printer is
powered on. It keeps searching for the HP Smart app to connect within 2 hours, and then
stops searching.
To put the control panel to the Auto Wireless Connect (AWC) setup mode, press and hold
the (Wireless) button for at least 20 seconds until the (Status) and the
(Power) LED start blinking together.
3 Open the HP Smart app, and then do one of the following: 
• Windows: On the home screen, click or tap Find Printer. If the printer is not found, click or
tap Set up a new printer. Follow the onscreen instructions to add the printer to your
network.
• iOS/Android: On the home screen, tap the Plus icon and then select the printer. If the
printer is not in the list, tap Add a new printer. Follow the onscreen instructions to add the
printer to your network.
Change the default printer setting the HP Smart app
You can set the printer setting from HP Smart app.
1 Open the HP Smart app.
2 Tap the Plus icon if you need to change to a different printer, or add a new printer.
3 Tap Printer Settings.
4 Select the option you want, and then change the setting.