User Manual

Sending a fax | 105
If an original is placed on the scanner glass, select Yes to add another page. Load another
original and press OK. When you have finished, select No when Another Page? appears.
Confirming a transmission
When the last page of your original has been sent successfully, the machine beeps and returns to
ready mode.
When something goes wrong while sending your fax, an error message appears on the display. If
you receive an error message, press (Cancel) to clear the message and try to send the fax
again.
You can set your machine to print a confirmation report automatically each time sending
a fax is completed. Press (fax) > (Menu) > Fax Setup > Sending > Fax Confirm. on
the control panel.
Delaying a fax transmission
You can set your machine to send a fax at a later time when you will not be present.
You cannot send a color fax using this feature.
1 Place a single document face down on the document glass, or load the documents face up
into the document feeder.
2 Press (fax) on the control panel.
3 Adjust the resolution and the darkness to suit your fax needs.
4 Press (Menu) > Fax Feature > Delay Send on the control panel.
5 Enter the number of the receiving fax machine and press OK.
6 The display asks you to enter another fax number to send the document.
7 To enter more fax numbers, press OK when Yes highlights and repeat steps 5.
You can add up to 10 destinations.