User Manual
Table Of Contents
- Table of Contents
- Introduction
- Menu Overview and Basic Setup
- Using a Network-Connected Machine
- Printing
- Copying
- Scanning
- Faxing
- Useful Setting Menus
- Maintenance
- Ordering supplies and accessories
- Available supplies
- Available maintenance parts
- Storing the toner cartridge
- Redistributing toner
- Replacing the toner cartridge
- Replacing the imaging drum
- Replacing the toner collection unit
- Monitoring the supplies life
- Setting the toner low alert
- Cleaning the machine
- Tips for moving & storing your machine
- Troubleshooting
- Tips for avoiding paper jams
- Clearing original document jams
- Clearing paper jams
- Understanding the LEDs
- A “Low Toner” or “Very Low Toner” message displays in Supplies information report
- Understanding display messages
- Paper feeding problems
- Power and cable connecting problems
- Solving other problems
- Solve wireless network problems
- Wireless connectivity checklist
- The printer does not print after the wireless configuration completes
- The printer does not print, and the computer has a third-party firewall installed
- The wireless connection does not work after moving the wireless router or printer
- Cannot connect more computers to the wireless printer
- The wireless printer loses communication when connected to a VPN
- The network does not appear in the wireless networks list
- The wireless network is not functioning
- Perform a wireless network diagnostic test
- Appendix
- Glossary
- Index
Forwarding a fax to another destination | 111
Forwarding a fax to another destination
You can set the machine to forward the received or sent fax to other destination by a fax or PC. If
you are out of office but have to receive the fax, this feature may be useful.
Forwarding a sent fax to another destination
You cannot send a color fax using this feature.
1 Place a single document face down on the document glass, or load the documents face up
into the document feeder.
2 Press (fax) > (Menu) > Fax Feature > Send Forward > Forward to Fax > On on the
control panel.
• If you selected On, you cannot send a fax manually (see "Sending a fax manually" on
page 102).
• Forward options may not be available depending on model or optional goods (see
"Variety feature" on page 10).
3 Enter the destination fax number, email address, or server address and press OK.
4 Press (Cancel) to return to ready mode.
Subsequent sent faxes will be forwarded to the specified fax machine.