User Manual

Copy | 123
Copy Setup
Some menus may not appear in the display depending on options or models. If so, it is not
applicable to your machine (see "Menu overview" on page 30).
To change the menu options:
In copy mode, press (Menu) > Copy Setup on the control panel.
• HP Color Laser MFP 178nw: When the Scan button’s LED is off, the machine is in copy mode.
• HP Color Laser MFP 179fnw: Press (copy) on the control panel.
Item Description
Change Default Resets the value or setting to the printer’s out-of-box state.
Change Default > Original Size
Improves the copy quality by selecting the document size for
the current copy job.
Change Default > Copies
You can enter the number of copies using the number
keypad.
Change Default > Collation
Set the machine to sort the copy job. For example, if you
make 2 copies of a 3 page original, one complete 3 page
document will print followed by a second complete
document.
• On: Prints output in sets to match the sequence of
originals.
• Off: Prints output sorted into stacks of individual pages.
Change Default >
Reduce/Enlarge
Reduces or enlarges the size of a copied image (see
"Reduced or enlarged copy" on page 89).
If the machine is set Eco mode, reduce and enlarge
features are not available.
Change Default > Darkness
Adjusts the brightness level to make a copy that is easier to
read, when the original contains faint markings and dark
images (see "Darkness" on page 88)
Change Default > Original Type
Improves the copy quality by selecting the document type
for the current copy job (see "Original type" on page 88)