User Manual

Fax | 125
Sending setup
Some menus may not appear in the display depending on options or models. If so, it is not
applicable to your machine (see "Menu overview" on page 30).
To change the menu options:
• Press (fax) > (Menu) > Fax Setup > Sending on the control panel.
Secure Receive
Stores the received fax in memory without printing out. To print
received documents, you need to enter the password. You can
prevent your received faxes from being accessed by unauthorized
people (see "Receiving in secure receiving mode" on page 109).
Cancel Job
Cancels the delayed fax job which is saved in memory (see
"Canceling a reserved fax job" on page 106).
Item Description
Redial Times
Sets the number of redial attempts. If you enter 0, the machine
will not redial.
Redial Term Sets the time interval before automatic redialling.
Prefix Dial
Sets a prefix of up to five digits. This number dials before any
automatic dial number is started. It is useful for accessing a PABX
exchange.
ECM Mode
Sends faxes using error correction mode (ECM) to makes sure the
faxes are sent smoothly without any error. It may take more
time.
Fax Confirm.
Sets the machine to print a report whether a fax transmission
was successfully completed or not. If you select On-Error, the
machine prints a report only when a transmission is not
successful.
Modem speed
Select the maximum modem speed you want if the phone line
fails to sustain a higher modem speed.
Image TCR
Prints a transmission report with a minimized image of the first
page of the fax sent.
Dial Mode
Sets the dialing mode to either tone or pulse. This setting may
not be available depending on your country.
Item Description