User Manual
Table Of Contents
- Table of Contents
- Introduction
- Menu Overview and Basic Setup
- Using a Network-Connected Machine
- Printing
- Copying
- Scanning
- Faxing
- Useful Setting Menus
- Maintenance
- Ordering supplies and accessories
- Available supplies
- Available maintenance parts
- Storing the toner cartridge
- Redistributing toner
- Replacing the toner cartridge
- Replacing the imaging drum
- Replacing the toner collection unit
- Monitoring the supplies life
- Setting the toner low alert
- Cleaning the machine
- Tips for moving & storing your machine
- Troubleshooting
- Tips for avoiding paper jams
- Clearing original document jams
- Clearing paper jams
- Understanding the LEDs
- A “Low Toner” or “Very Low Toner” message displays in Supplies information report
- Understanding display messages
- Paper feeding problems
- Power and cable connecting problems
- Solving other problems
- Solve wireless network problems
- Wireless connectivity checklist
- The printer does not print after the wireless configuration completes
- The printer does not print, and the computer has a third-party firewall installed
- The wireless connection does not work after moving the wireless router or printer
- Cannot connect more computers to the wireless printer
- The wireless printer loses communication when connected to a VPN
- The network does not appear in the wireless networks list
- The wireless network is not functioning
- Perform a wireless network diagnostic test
- Appendix
- Glossary
- Index
System setup | 129
Paper setup
Some menus may not appear in the display depending on options or models. If so, it is not
applicable to your machine (see "Menu overview" on page 30).
To change the menu options:
• Press (Menu) > System Setup > Paper Setup on the control panel.
Sound / Volume
Some menus may not appear in the display depending on options or models. If so, it is not
applicable to your machine (see "Menu overview" on page 30).
To change the menu options:
• Press (Menu) > System Setup > Sound/Volume on the control panel.
Humidity
Optimizes print quality according to the humidity in the
environment.
Auto Continue
Determine whether or not the machine continues printing when it
detects the paper does not match the paper settings.
• Off: If a paper mismatch occurs, the machine waits until you
insert the correct paper.
• After 0 Sec: Even though a paper mismatch occurs, the machine
continues printing.
• After 30 Sec: If a paper mismatch occurs, an error message will
display. The machine waits for about 30 second, then
automatically clear the message and continue printing.
Paper Substit.
Automatically substitutes the printer driver’s paper size to prevent
the paper mismatch between Letter and A4. For example, if you
have A4 paper in the tray but you set the paper size to Letter in the
printer driver, the machine prints on A4 paper and vice versa.
Item Description
Paper Size
Sets the paper size as A4, Letter, or other paper sizes, according to your
requirements.
Paper Type Chooses the type of the paper for each tray.
Margin Sets the margins for the document.
Item Description