User Manual
Table Of Contents
- Table of Contents
- Introduction
- Menu Overview and Basic Setup
- Using a Network-Connected Machine
- Printing
- Copying
- Scanning
- Faxing
- Useful Setting Menus
- Maintenance
- Ordering supplies and accessories
- Available supplies
- Available maintenance parts
- Storing the toner cartridge
- Redistributing toner
- Replacing the toner cartridge
- Replacing the imaging drum
- Replacing the toner collection unit
- Monitoring the supplies life
- Setting the toner low alert
- Cleaning the machine
- Tips for moving & storing your machine
- Troubleshooting
- Tips for avoiding paper jams
- Clearing original document jams
- Clearing paper jams
- Understanding the LEDs
- A “Low Toner” or “Very Low Toner” message displays in Supplies information report
- Understanding display messages
- Paper feeding problems
- Power and cable connecting problems
- Solving other problems
- Solve wireless network problems
- Wireless connectivity checklist
- The printer does not print after the wireless configuration completes
- The printer does not print, and the computer has a third-party firewall installed
- The wireless connection does not work after moving the wireless router or printer
- Cannot connect more computers to the wireless printer
- The wireless printer loses communication when connected to a VPN
- The network does not appear in the wireless networks list
- The wireless network is not functioning
- Perform a wireless network diagnostic test
- Appendix
- Glossary
- Index
Network setup | 133
Network setup
Some menus may not appear in the display depending on options or models. If so, it is not
applicable to your machine (see "Menu overview" on page 30).
• Press (Menu)> Network on the control panel.
Option Description
TCP/IP (IPv4)
Selects the appropriate protocol and configure parameters to use the
network environment.
There are many of parameters to be set. If you are not sure,
leave as is, or consult the network administrator.
TCP/IP (IPv6)
Selects this option to use the network environment through IPv6 (see
"IPv6 configuration" on page 55).
Ethernet Configure the network transmission speed and active port.
Wi-Fi Selects this option to use the Wi-Fi network.
Clear Settings Reverts the network settings to the default values. (Reboot required.)
Network Conf.
This list shows information on your machine’s network connection and
configuration.
Protocol Mgr.
You can activate or deactivate the following protocols.
• HTTP: You can set whether to use HP Embedded Web Server or not.
Turn the power off and on after you change this option.
• WINS: You can configure the WINS server. WINS(Windows Internet
Name Service) is used in the Windows operating system.
Turn the power off and on after you change this option.