User Manual
Table Of Contents
- Table of Contents
- Introduction
- Menu Overview and Basic Setup
- Using a Network-Connected Machine
- Printing
- Copying
- Scanning
- Faxing
- Useful Setting Menus
- Maintenance
- Ordering supplies and accessories
- Available supplies
- Available maintenance parts
- Storing the toner cartridge
- Redistributing toner
- Replacing the toner cartridge
- Replacing the imaging drum
- Replacing the toner collection unit
- Monitoring the supplies life
- Setting the toner low alert
- Cleaning the machine
- Tips for moving & storing your machine
- Troubleshooting
- Tips for avoiding paper jams
- Clearing original document jams
- Clearing paper jams
- Understanding the LEDs
- A “Low Toner” or “Very Low Toner” message displays in Supplies information report
- Understanding display messages
- Paper feeding problems
- Power and cable connecting problems
- Solving other problems
- Solve wireless network problems
- Wireless connectivity checklist
- The printer does not print after the wireless configuration completes
- The printer does not print, and the computer has a third-party firewall installed
- The wireless connection does not work after moving the wireless router or printer
- Cannot connect more computers to the wireless printer
- The wireless printer loses communication when connected to a VPN
- The network does not appear in the wireless networks list
- The wireless network is not functioning
- Perform a wireless network diagnostic test
- Appendix
- Glossary
- Index
Network setup | 134
Protocol Mgr.
• SNMPv1/v2: You have to enable this option to use SNMP V1/V2
protocol. Administrator’s can use SNMP to monitor and manage
machines on the network.
• UPnP(SSDP): You have to enable this option to use UPnP(SSDP)
protocol.
Turn the power off and on after you change this option.
• mDNS: You have to enable this option to use MDNS (Multicast
Domain Name System) protocol.
• SLP: You can configure SLP (Service Location Protocol) settings. This
protocol allows host applications to find services in a local area
network without prior configuration.
Turn the power off and on after you change this option.
Option Description