User Manual

Control panel overview | 26
9Scan Switches to Scan mode.
10
Menu Opens Menu mode and scrolls through the available menus
(see "Menu overview" on page 30).
11 OK Confirms the selection on the screen.
12
Left/Right
Arrows
Scrolls through the options available in the selected menu
and increases or decreases values.
13 Back Sends you back to the upper menu level.
14 Numeric keypad
Dials a number or enters alphanumeric characters (see
"Keypad letters and numbers" on page 36).
15
Address Book Allows you to store frequently used fax numbers or search
for stored fax numbers (see "Setting up the fax address book"
on page 115).
16 Redial/Pause
Redials the recently sent fax number or received caller ID in
ready mode, or inserts a pause(-) into a fax number in edit
mode (see "Redialing the fax number" on page 104).
17 On Hook Dial
When you press this button, you can hear a dial tone. Then
enter a fax number. It is similar to making a call using
speaker phone (see "Receiving manually in Tel mode" on
page 108).
18 Cancel Stops an operations at any time.
19 Power
Turns the power on or off, or wakes up the machine from the
power save mode. If you need to turn the machine off, press
this button for more than three seconds.
20
Start (Mono,
Color)
Starts a job.